HP 2533t Mobile Setting power options, Using power-saving states, Initiating and exiting Standby

Page 47

Select Start > Turn Off Computer > Turn Off.

NOTE: If you have been registered to a network domain, the button you click will be called Shut Down instead of Turn Off Computer.

If the computer is unresponsive and you are unable to use the preceding shutdown procedures, try the following emergency procedures in the sequence provided:

●Press and hold the power button for at least 5 seconds.

●Disconnect the computer from external power and remove the battery.

Setting power options

Using power-saving states

The computer has one power-saving state enabled at the factory: Standby.

When Standby is initiated, the power lights blink and the screen clears. Your computer is disconnected from the network.

CAUTION: To prevent possible audio and video degradation, loss of audio or video playback functionality, or loss of information, do not initiate Standby while reading from a disc or an external media card.

NOTE: Hibernation is disabled at the factory.

NOTE: You cannot initiate any type of networking connection or perform any computer functions while the computer is in Standby.

Initiating and exiting Standby

NOTE: Power settings and timeouts can be changed in Power Options.

With the computer on, you can initiate Standby in any of the following ways:

●Press fn+f3.

●Click Start > Turn Off Computer > Stand By. If Stand by is not displayed, follow these steps:

a.Click the down arrow.

b.Click Stand by from the list.

c.Click OK.

To exit Standby:

▲Press the power button.

When the computer exits Standby, the power lights turn on and your work returns to the screen where you stopped working.

NOTE: If you have set a password to be required when the computer exits Standby, you must enter your Windows password before your work will return to the screen.

Setting power options 37

Page 46 Page 48
Image 47
Page 46 Page 48
Contents HP 2533t Mobile Thin Client Product notice Safety warning notice Iv Safety warning notice Table of contents Pointing devices and keyboard Multimedia Modem and LAN Drives Appendix a Routine care Pointing devices Identifying the hardwareTop components Component Description LightsOff If the computer is plugged into an external Buttons and switchesKeys Adjust Power PropertiesFn key DisplayFront components Right-side components Left-side components Components Description Rear componentsBottom components Wireless antennas Identifying the labels Commit Enhanced Write Filter EWFAll DisableEnable Select Start RunGauge CommitanddisableDescription Using the Enhanced Write Filter EWF utility Using the Enhanced Write Filter EWF status utility Drive C ConfigurationLocal drives Drive ZRoaming profiles Click Reconnect at LoginSaving files Mapping network drivesCreating user profiles User accountsCreating a new user account Page Remote Desktop Connection ApplicationsHP Session Allocation Manager SAM HP Virtual Client EssentialsTeemNT Terminal Emulation HP Remote Graphics Software RGSPage Select Start Control Panel HP ThinState Capture HP ThinState CaptureHP ThinState Deploy Microsoft Internet Explorer Pointing devices and keyboard Using pointing devicesDisplaying system information fn+esc Using hotkeysDecreasing screen brightness fn+f9 Switching the screen image fn+f4Viewing battery charge information fn+f8 Initiating Standby fn+f3Using the HP Quick Launch Buttons Displaying the Q Menu Accessing the Quick Launch Buttons control panelEnabling and disabling the embedded numeric keypad Using the keypadsUsing the embedded numeric keypad Switching key functions on the embedded numeric keypad Using an optional external numeric keypadPower control and light locations PowerProperties Shutting down the computerSelect Start Turn Off Computer Turn Off Setting power optionsUsing power-saving states Initiating and exiting StandbyDisplaying the remaining battery charge Using battery powerSetting password protection upon exiting Standby Inserting or removing the battery Charging a battery Resolving a low battery level Managing low battery levelsConserving battery power Identifying low battery levelsDisposing of a used battery Storing a batteryConnecting the AC adapter Using external AC powerPlug the other end of the power cord into an AC outlet Power Multimedia Using multimedia hardwareUsing the audio features Using the audio-out headphone jack Using the audio-in microphone jackAdjusting the volume Using the external monitor port Using the video featuresPreventing playback disruptions Using multimedia softwareOpening preinstalled multimedia software Using multimedia softwareSelect Start My Computer Changing DVD region settingsObserving the copyright warning Using Wlan WirelessAbout integrated wireless devices Using wireless controlsSetting up a Wlan Select Start HP System Information Connecting to a WlanUsing wireless security features Identifying a Wlan deviceModem and LAN Using a modemConnecting a modem cable Connecting a country- or region-specific modem cable adapter Viewing the current location selection Selecting a location settingAdding new locations when traveling Set the modem to ignore dial tones Solving travel connection problemsCheck the telephone line type Check for pulse or tone dialingClear the check box for Wait for dial tone before dialing Connecting to a local area networkProtecting the computer SecurityAutomatic logon Using passwordsSetting passwords in Windows Using administrator and user passwordsManual logon Setting passwords in Computer SetupUsing a setup password Administrator logonEntering a setup password Using a power-on passwordManaging a setup password Requiring a power-on password at restart Managing a power-on passwordEntering a power-on password Configuring Microsoft Windows Firewall Using Microsoft Windows FirewallAdding exceptions Gathering configuration informationTroubleshooting applications Identifying failure symptomsClick Add Port Adding a programAdding a port Installing a security cable Connecting a USB device Hardware upgradesUsing a USB device Securing USB ports Using the expansion portUsing the USB Storage Options utility Removing a USB deviceInserting and removing a PC Card Using PC CardsPage Inserting a digital card Using SD Card Reader cardsRemoving a digital card Click Use the Following Port Adding printers using a text-only print driverAdding a printer Select Start Printers and Faxes Click Add a printerUsing manufacturer print drivers Handling drives Identifying installed drivesDrives Inserting an optical disc CD or DVD Using optical drives select models onlyRemoving an optical disc CD or DVD When the disc tray opensWhen the disc tray does not open Page Using an optional external MultiBay or external MultiBay Using external drivesUsing optional external devices Memory modules Page Page Page About the boot order device MultibootEnabling boot devices in Computer Setup Considering boot order changes Choosing a boot device using the F9 prompt Choosing Multiboot preferencesSetting a new boot order in Computer Setup Starting Computer Setup Computer SetupNavigating and selecting in Computer Setup Using Computer SetupRestoring factory settings in Computer Setup Security menu Computer Setup menusDiagnostics menu File menuSystem Configuration menu Traveling and shipping Cleaning the displayCleaning the keyboard Routine carePage USB IndexJacks Passwords SAM
Related manuals
Manual 112 pages 10.06 Kb Manual 116 pages 42.21 Kb Manual 3 pages 25.35 Kb Manual 80 pages 44.65 Kb Manual 18 pages 18.88 Kb

2533t Mobile specifications

The HP 2533t Mobile is a versatile and robust mobile workstation designed for professionals who demand high performance and reliability on the go. This mobile workstation seamlessly combines powerful hardware with advanced features to cater to various business needs, making it an ideal choice for engineers, designers, and data analysts.

One of the standout features of the HP 2533t is its impressive processing power. It is equipped with Intel's latest generation processors, which provide exceptional speed and efficiency. Coupled with ample RAM options, the workstation ensures smooth multitasking, allowing users to run demanding applications simultaneously without any lag. The HP 2533t's graphics capabilities are equally noteworthy, featuring dedicated graphics options that accommodate graphic-intensive tasks. This makes it perfect for 3D modeling, video editing, and other creative applications.

Display quality is crucial for any mobile workstation, and the HP 2533t does not disappoint. It comes with a bright and vibrant display that offers excellent color accuracy and wide viewing angles. Users can choose between different screen resolutions, catering to both standard and high-definition needs. This ensures that professionals can work comfortably and efficiently, whether they are indoors or outdoors.

Durability is another characteristic that sets the HP 2533t apart. Built to withstand the rigors of daily use, it features a robust chassis and a spill-resistant keyboard, making it suitable for various work environments. The mobile workstation is also lightweight and portable, allowing users to easily transport it between different work sites.

In terms of connectivity, the HP 2533t is well-equipped. It offers multiple USB ports, HDMI, and Ethernet options, providing seamless integration with various peripherals and networks. Wireless connectivity is also robust, featuring options for Wi-Fi and Bluetooth, ensuring users remain connected at all times.

Furthermore, security features are a top priority for the HP 2533t. It includes advanced options like a fingerprint reader and TPM (Trusted Platform Module) to safeguard sensitive data, making it a reliable choice for businesses concerned about data security.

In summary, the HP 2533t Mobile is a powerful and durable mobile workstation that excels in performance, display quality, and security. Its versatile features and reliable technology make it an excellent investment for professionals looking for a capable device to enhance their productivity.
Top Page Image Contents