HP 2533t Mobile manual Changing DVD region settings, Observing the copyright warning

Page 60

Changing DVD region settings

Most DVDs that contain copyrighted files also contain region codes. The region codes help protect copyrights internationally.

You can play a DVD containing a region code only if the region code on the DVD matches the region setting on your DVD drive.

CAUTION: The region settings on your DVD drive can be changed only 5 times.

The region setting you select the fifth time becomes the permanent region setting on the DVD drive.

The number of region changes remaining is displayed on the DVD Region tab.

To change settings through the operating system:

1.Select Start > My Computer.

2.Right-click in the window and select Properties > Hardware tab > Device Manager.

3.Click the "+" sign next to DVD/CD-ROM drives, right-click the DVD drive for which you want to change region settings, and then click Properties.

4.Make your changes on the DVD Region tab.

5.Click OK.

NOTE: You must commit these changes in order for them to be saved. Refer to Chapter 2, “Enhanced Write Filter,” for additional information.

Observing the copyright warning

It is a criminal offense, under applicable copyright laws, to make unauthorized copies of copyright- protected material, including computer programs, films, broadcasts, and sound recordings. Do not use this computer for such purposes.

50 Chapter 7 Multimedia

Image 60
Contents HP 2533t Mobile Thin Client Product notice Safety warning notice Iv Safety warning notice Table of contents Pointing devices and keyboard Multimedia Modem and LAN Drives Appendix a Routine care Identifying the hardware Top componentsPointing devices Lights Component DescriptionButtons and switches Off If the computer is plugged into an externalAdjust Power Properties KeysDisplay Fn keyFront components Right-side components Left-side components Rear components Components DescriptionBottom components Wireless antennas Identifying the labels Enhanced Write Filter EWF CommitDisable EnableSelect Start Run AllCommitanddisable DescriptionGauge Using the Enhanced Write Filter EWF utility Using the Enhanced Write Filter EWF status utility Configuration Local drivesDrive Z Drive CClick Reconnect at Login Saving filesMapping network drives Roaming profilesUser accounts Creating a new user accountCreating user profiles Page Applications Remote Desktop ConnectionHP Virtual Client Essentials TeemNT Terminal EmulationHP Remote Graphics Software RGS HP Session Allocation Manager SAMPage HP ThinState Capture Select Start Control Panel HP ThinState CaptureHP ThinState Deploy Microsoft Internet Explorer Using pointing devices Pointing devices and keyboardUsing hotkeys Displaying system information fn+escSwitching the screen image fn+f4 Viewing battery charge information fn+f8Initiating Standby fn+f3 Decreasing screen brightness fn+f9Using the HP Quick Launch Buttons Accessing the Quick Launch Buttons control panel Displaying the Q MenuUsing the keypads Using the embedded numeric keypadEnabling and disabling the embedded numeric keypad Using an optional external numeric keypad Switching key functions on the embedded numeric keypadPower Power control and light locationsShutting down the computer PropertiesSetting power options Using power-saving statesInitiating and exiting Standby Select Start Turn Off Computer Turn OffUsing battery power Setting password protection upon exiting StandbyDisplaying the remaining battery charge Inserting or removing the battery Charging a battery Managing low battery levels Conserving battery powerIdentifying low battery levels Resolving a low battery levelStoring a battery Disposing of a used batteryUsing external AC power Connecting the AC adapterPlug the other end of the power cord into an AC outlet Power Using multimedia hardware Using the audio featuresMultimedia Using the audio-in microphone jack Using the audio-out headphone jack Adjusting the volume Using the video features Using the external monitor portUsing multimedia software Opening preinstalled multimedia softwareUsing multimedia software Preventing playback disruptionsChanging DVD region settings Observing the copyright warningSelect Start My Computer Wireless About integrated wireless devicesUsing wireless controls Using WlanSetting up a Wlan Connecting to a Wlan Using wireless security featuresIdentifying a Wlan device Select Start HP System InformationUsing a modem Connecting a modem cableModem and LAN Connecting a country- or region-specific modem cable adapter Selecting a location setting Viewing the current location selectionAdding new locations when traveling Solving travel connection problems Check the telephone line typeCheck for pulse or tone dialing Set the modem to ignore dial tonesConnecting to a local area network Clear the check box for Wait for dial tone before dialingSecurity Protecting the computerUsing passwords Setting passwords in WindowsUsing administrator and user passwords Automatic logonSetting passwords in Computer Setup Using a setup passwordAdministrator logon Manual logonUsing a power-on password Managing a setup passwordEntering a setup password Managing a power-on password Entering a power-on passwordRequiring a power-on password at restart Using Microsoft Windows Firewall Configuring Microsoft Windows FirewallGathering configuration information Troubleshooting applicationsIdentifying failure symptoms Adding exceptionsAdding a program Adding a portClick Add Port Installing a security cable Hardware upgrades Using a USB deviceConnecting a USB device Using the expansion port Using the USB Storage Options utilityRemoving a USB device Securing USB portsUsing PC Cards Inserting and removing a PC CardPage Using SD Card Reader cards Inserting a digital cardRemoving a digital card Adding printers using a text-only print driver Adding a printerSelect Start Printers and Faxes Click Add a printer Click Use the Following PortUsing manufacturer print drivers Identifying installed drives DrivesHandling drives Using optical drives select models only Inserting an optical disc CD or DVDWhen the disc tray opens Removing an optical disc CD or DVDWhen the disc tray does not open Page Using external drives Using optional external devicesUsing an optional external MultiBay or external MultiBay Memory modules Page Page Page Multiboot About the boot order deviceEnabling boot devices in Computer Setup Considering boot order changes Choosing Multiboot preferences Setting a new boot order in Computer SetupChoosing a boot device using the F9 prompt Computer Setup Starting Computer SetupUsing Computer Setup Navigating and selecting in Computer SetupRestoring factory settings in Computer Setup Computer Setup menus Diagnostics menuFile menu Security menuSystem Configuration menu Cleaning the display Cleaning the keyboardRoutine care Traveling and shippingPage Index USBJacks Passwords SAM
Related manuals
Manual 112 pages 10.06 Kb Manual 116 pages 42.21 Kb Manual 3 pages 25.35 Kb Manual 80 pages 44.65 Kb Manual 18 pages 18.88 Kb