HP 2533t Mobile Saving files, Mapping network drives, Roaming profiles, Click Reconnect at Login

Page 29

CAUTION: If the available free space on the flash drive is reduced to below 3 MB, the computer becomes unstable.

A write filter is used by the computer for security and to prevent excessive flash write activity. Changes to the computer configuration are lost when the computer is restarted unless the write filter cache is disabled or a -commitcommand is issued during the current boot session. Refer to Chapter 2, “Enhanced Write Filter,” for additional information.

Saving files

The computer uses an embedded operating system with a fixed amount of flash memory. HP recommends that you save files that you want to retain on a server rather than on your computer. Be careful of application settings that write to the C drive, which resides in flash memory (in particular, many applications by default write cache files to the C drive on the local system). If you must write to a local drive, change the application settings to use the Z drive. To minimize writing to the C drive, update the configuration settings.

Mapping network drives

To keep the mappings after the computer is restarted, follow these steps:

1.Disable the write filter cache during the current boot session or issue the –commitcommand.

2.Click Reconnect at Login.

Because a user logon cannot disable the write filter cache, you can retain the mappings created by a user by logging off the user (do not shut down or restart the computer) and logging back on as administrator, and then disabling the write filter.

You can also assign the remote home directory by using a user manager utility or by other means known to administrators.

Roaming profiles

Write roaming profiles to the C drive. The profiles need to be limited in size and will not be retained when the computer is restarted.

NOTE: For roaming profiles to work and be downloaded, there must be sufficient flash space available. In some cases it may be necessary to remove software components to free up space for roaming profiles.

Local drives 19

Image 29

Contents HP 2533t Mobile Thin Client Product notice Safety warning notice Iv Safety warning notice Table of contents Pointing devices and keyboard Multimedia Modem and LAN Drives Appendix a Routine care Pointing devices Identifying the hardwareTop components Component Description LightsOff If the computer is plugged into an external Buttons and switchesKeys Adjust Power PropertiesFn key DisplayFront components Right-side components Left-side components Components Description Rear componentsBottom components Wireless antennas Identifying the labels Commit Enhanced Write Filter EWFEnable DisableSelect Start Run AllGauge CommitanddisableDescription Using the Enhanced Write Filter EWF utility Using the Enhanced Write Filter EWF status utility Local drives ConfigurationDrive Z Drive CSaving files Click Reconnect at LoginMapping network drives Roaming profilesCreating user profiles User accountsCreating a new user account Page Remote Desktop Connection ApplicationsTeemNT Terminal Emulation HP Virtual Client EssentialsHP Remote Graphics Software RGS HP Session Allocation Manager SAMPage Select Start Control Panel HP ThinState Capture HP ThinState CaptureHP ThinState Deploy Microsoft Internet Explorer Pointing devices and keyboard Using pointing devicesDisplaying system information fn+esc Using hotkeysViewing battery charge information fn+f8 Switching the screen image fn+f4Initiating Standby fn+f3 Decreasing screen brightness fn+f9Using the HP Quick Launch Buttons Displaying the Q Menu Accessing the Quick Launch Buttons control panelEnabling and disabling the embedded numeric keypad Using the keypadsUsing the embedded numeric keypad Switching key functions on the embedded numeric keypad Using an optional external numeric keypadPower control and light locations PowerProperties Shutting down the computerUsing power-saving states Setting power optionsInitiating and exiting Standby Select Start Turn Off Computer Turn OffDisplaying the remaining battery charge Using battery powerSetting password protection upon exiting Standby Inserting or removing the battery Charging a battery Conserving battery power Managing low battery levelsIdentifying low battery levels Resolving a low battery levelDisposing of a used battery Storing a batteryConnecting the AC adapter Using external AC powerPlug the other end of the power cord into an AC outlet Power Multimedia Using multimedia hardwareUsing the audio features Using the audio-out headphone jack Using the audio-in microphone jackAdjusting the volume Using the external monitor port Using the video featuresOpening preinstalled multimedia software Using multimedia softwareUsing multimedia software Preventing playback disruptionsSelect Start My Computer Changing DVD region settingsObserving the copyright warning About integrated wireless devices WirelessUsing wireless controls Using WlanSetting up a Wlan Using wireless security features Connecting to a WlanIdentifying a Wlan device Select Start HP System InformationModem and LAN Using a modemConnecting a modem cable Connecting a country- or region-specific modem cable adapter Viewing the current location selection Selecting a location settingAdding new locations when traveling Check the telephone line type Solving travel connection problemsCheck for pulse or tone dialing Set the modem to ignore dial tonesClear the check box for Wait for dial tone before dialing Connecting to a local area networkProtecting the computer SecuritySetting passwords in Windows Using passwordsUsing administrator and user passwords Automatic logonUsing a setup password Setting passwords in Computer SetupAdministrator logon Manual logonEntering a setup password Using a power-on passwordManaging a setup password Requiring a power-on password at restart Managing a power-on passwordEntering a power-on password Configuring Microsoft Windows Firewall Using Microsoft Windows FirewallTroubleshooting applications Gathering configuration informationIdentifying failure symptoms Adding exceptionsClick Add Port Adding a programAdding a port Installing a security cable Connecting a USB device Hardware upgradesUsing a USB device Using the USB Storage Options utility Using the expansion portRemoving a USB device Securing USB portsInserting and removing a PC Card Using PC CardsPage Inserting a digital card Using SD Card Reader cardsRemoving a digital card Adding a printer Adding printers using a text-only print driverSelect Start Printers and Faxes Click Add a printer Click Use the Following PortUsing manufacturer print drivers Handling drives Identifying installed drivesDrives Inserting an optical disc CD or DVD Using optical drives select models onlyRemoving an optical disc CD or DVD When the disc tray opensWhen the disc tray does not open Page Using an optional external MultiBay or external MultiBay Using external drivesUsing optional external devices Memory modules Page Page Page About the boot order device MultibootEnabling boot devices in Computer Setup Considering boot order changes Choosing a boot device using the F9 prompt Choosing Multiboot preferencesSetting a new boot order in Computer Setup Starting Computer Setup Computer SetupNavigating and selecting in Computer Setup Using Computer SetupRestoring factory settings in Computer Setup Diagnostics menu Computer Setup menusFile menu Security menuSystem Configuration menu Cleaning the keyboard Cleaning the displayRoutine care Traveling and shippingPage USB IndexJacks Passwords SAM

Related manuals

Manual 112 pages 10.06 Kb

Manual 116 pages 42.21 Kb

Manual 3 pages 25.35 Kb

Manual 80 pages 44.65 Kb

Manual 18 pages 18.88 Kb