USB board and optical drive bezel
Description | Spare part number |
|
|
USB board (includes optical drive bezel and cable) | |
|
|
Before removing the USB board and optical drive bezel, follow these steps:
1.Shut down the computer.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 30).
5.Remove the switch cover and keyboard (see Switch cover and keyboard on page 40).
Remove the USB board and optical drive bezel:
1.Turn the computer upside down, with the front toward you.
2.Remove the two Phillips PM2.0×4.0 screws that secure the optical drive bezel to the computer.
3.Turn the computer
4.Disconnect the USB board cable (1) from the system board.
44 Chapter 4 Removal and replacement procedures