PC Card assembly
Description | Spare part number |
|
|
PC Card assembly |
|
|
|
Before removing the PC Card assembly, follow these steps:
1.Shut down the computer.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 30).
5.Remove the following components:
a.Flash drive (see Flash drive on page 36)
b.WLAN module (see WLAN module on page 34)
c.Optical drive (see Optical drive on page 38)
d.Switch cover and keyboard (see Switch cover and keyboard on page 40)
e.Display assembly (see Display assembly on page 47)
f.Top cover (see Top cover on page 52)
g.System board (see System board on page 57)
Remove the PC Card assembly:
1.Turn the system board upside down, with the front toward you.
2.Remove the two Phillips PM2.0×5.0 screws that secure the PC Card assembly to the system board.
3.Turn the system board upside down, with the rear toward you.
Component replacement procedures 59