HP 2533t Mobile manual System Configuration menu

System Configuration menu

NOTE: Some of the listed System Configuration options may not be supported by your computer.

Select	To do this
Language (or press f2)	Change the Computer Setup language.
Boot options	● Set f9, f10, and f12 delay when starting up.
	● Enable/disable CD-ROM boot.
	●	Enable/disable floppy boot.
	● Enable/disable internal network adapter boot.
	● Enable/disable MultiBoot, which sets a boot order that can include most boot
		devices in the system.
	● Set the boot order.
Device configurations	● Swap the functions of the fn key and left ctrl key.
	● Enable/disable USB legacy support. When enabled, USB legacy support
		allows the following:
		◦	Use of a USB keyboard in Computer Setup even when a Windows
			operating system is not running.
		◦	Startup from bootable USB devices, including a hard drive, diskette
			drive, or optical drive connected by a USB port to the computer.
Built-In Device Options	● Enable/disable embedded WLAN Device Radio.
	● Enable/disable network Interface Controller (LAN)
	●	Enable/disable LAN/WAN switching.
	● Enable/disable Wake on LAN.
	● Enable/disable the optical disc drive.
Port Options	● Enable/disable the USB port.
	● Enable/disable the PC Card slot.
	● Enable/disable flash media reader.

68 Chapter 5 Computer Setup