HP C5150, C5140 Install software on additional computers, Go to at the back of this setup guide

14 Install software on additional computers

If you have additional computers on your network, install the

HP All-in-One software on each computer. Choose the correct

HP All-in-One CD for each installation.

Follow the onscreen instructions. Make sure that you choose the connection types between the network and your HP All-in-One (not between your computer and the network).

15 Go to step 16 at the back of this setup guide

Troubleshooting

Problem: The Microsoft Add Hardware screen appears.

Action: Click Cancel. Unplug the USB cable, and then insert the HP All-in-One

Windows CD. Refer to Section A.

Problem: The Printer Not Found message appears.

Action: First make sure that you have an active connection with the device. Check your color graphics display for an icon. If you do not see an icon, go back to your connection type Section (B or C).

If you have an active connection, try the following:

•Turn your device off, wait 30 seconds, and then turn it back on.

•Try temporarily disconnecting your firewall.

Wired (Ethernet) network users:

•Check the cable between the router and the device.

•Check the cable between your computer and the device.

•Make sure your LAN card is set up properly.

HP Photosmart C5100 All-in-One series

Basics Guide

See the User Guide for more troubleshooting and additional set up information.

HP All-in-One • 11