HP C5140, C5180 Connect the power cord and adapter, Press the On button, Open the access door

Page 3

6 Connect the power cord and adapter

USB cable users: Do not connect the USB cable until instructed later in this guide.

After you press the On button, wait for the prompt on the color graphics display before continuing.

HP All-in-One • 3

Image 3

Contents Locate components Remove all tape and lift displayLoad paper into both trays If not attachedConnect the power cord and adapter Open the access doorPress the On button Insert all six ink cartridges Lift latches inside of the deviceTurn on your computer Close the access door and follow the promptsUSB Connection Do not connect yet Choose ONE connection type a or BWindows Users A1 Choose the correct CDA2 Connect the USB cable A3 Go to at the back of this setup guideB1 Connect the Ethernet cable B2 Choose the correct CD B3 Go to at the back of this setup guideGo to at the back of this setup guide Install software on additional computersPrint a 4 x 6 inch photo

Related manuals

Manual 45 pages 59.26 Kb