4 | Attach the control panel faceplate |
(if not attached) | |
a | b |
aPosition the control panel faceplate over the buttons on the device.
bPress down firmly on all edges of th overlay to secure it. Make sure all buttons are visible and not blocked.
5 Load paper into both trays
Main tray:
a | b | c | d |
|
|
|
Load plain white paper in the bottom paper tray. Plain paper is needed for alignment.
Photo paper tray:
e | f | g |
e Lift the output tray. | f Pull out the photo tray. |
h | i |
gLoad the 4 x 6 inch (10 x 15 cm photo paper from the sample pa with the glossy side down in the photo tray.
Tip: If the paper is tabbed, make sure the tab is towards you.
2 • HP