HP C5150, C5140, C5180 manual Close the access door and follow the prompts, Turn on your computer

Page 5

11 Close the access door and follow the prompts

a

b

aAfter you close the access door, a prompt appears to load plain white paper. Make sure paper is loaded, and then press OK to start the process.

The device initializes the ink cartridges and aligns the printer. This takes approximately 5 minutes.

CAUTION: Do not disconnect or turn off the

HP All-in-One during this time. You may hear the device making noises.

bAfter the alignment page is printed, alignment is complete. Check the display for status, then press OK. Recycle or discard the alignment page.

12 Turn on your computer

a Turn on your computer, login if necessary, and the wait for the desktop to appear.

b Close any open programs.

HP All-in-One • 5

Image 5
Contents Locate components Remove all tape and lift display Load paper into both trays If not attachedPress the On button Connect the power cord and adapterOpen the access door Insert all six ink cartridges Lift latches inside of the deviceTurn on your computer Close the access door and follow the promptsUSB Connection Do not connect yet Choose ONE connection type a or BWindows Users A1 Choose the correct CDA2 Connect the USB cable A3 Go to at the back of this setup guideB1 Connect the Ethernet cable B2 Choose the correct CD B3 Go to at the back of this setup guideGo to at the back of this setup guide Install software on additional computersPrint a 4 x 6 inch photo
Related manuals
Manual 45 pages 59.26 Kb