WIRING GUIDE FOR 2045
The following Wiring Guide is to help assist in the wiring of any combination of the Optional Kit listed below:
RCK60 - REMOTE CONTROL KIT
WSK60 - WALL SWITCH KIT
WTK60 - WALL THERMOSTAT KIT
IMPORTANT: Before ordering or installing any to the available kits, remember the following...
1)Not all Optional Kits will work together. Example: The (RCK60) Remote Control Kit, the (WSK60) Wall Switch Kit, and the (WTK60) Wall Thermostat Kit cannot be used at the time.
2)When using any of the three Optional Kits listed above, the Rocker Switch on the unit must be set to "OFF".
3)If you choose to use any combination of the above Optional Kits, only one of those kits can be used at a time. Example: If you have the Optional Remote Control Kit and the Optional Wall Switch Kit, operation of the unit must be controlled by one or the other. If you want to use the remote control, simply turn the Wall Switch to "OFF".
STANDARD WIRING FROM FACTORY:
CONTROL VALVE
PILOT
| L |
|
| PI OT |
|
F | Sit | O |
F |
| |
O |
| N |
E A
TP TH TP TH
ROCKER SWITCH
WIRING OF THE RCK60 - REMOTE CONTROL KIT:
CONTROL VALVE
|
|
| PILOT |
| L |
|
|
| PI OT |
|
|
F | Sit | O |
|
F | TH | ||
O | N | ||
|
|
| TP |
E |
| A | TP TH |
|
|
PIGGYBACK
DISCONNECT
REMOTE CONTROL
SENSOR
ROCKER
SWITCH
Remember the Rocker Switch must be turned to "OFF" while using the Remote Control.
WIRING WITH THE WTK60 - WALL THERMOSTAT KIT:
|
| 10 | 21 | 32 | c |
CONTROL VALVE | WALL | 50 | 60 70 | 80 90 |
|
THERMOSTAT |
|
|
|
|
Remember the Rocker
FF
O
E
PILOT
Sit
O
N
A
PILOT
TP TH TP TH
PIGGYBACK
DISCONNECT
10 21 32 c
50 60 70 80 90
ROCKER SWITCH
Switch must be turned to "OFF" while using the Wall Thermostat.
24