Error Codes and Display Indicators

CAUTION: When performing any internal electrical maintenance

•Moving parts inside of the cabinet may cause injury. Do not operate unit with panels removed or open.

•HOT parts. Do not operate the unit with panel open.

•Risk of electric shock. Disconnect power before servicing unit.

•In the event of component failure, replace with the original factory equipment.

Error	Error	Possible
Code	Descrption	Causes
Err1	The high limit temperature sensor	•	Inadequate ventilation.
	has tripped.	•	Room fan failure.
		•	Exhaust Blockage.
		• Electrical Open in the over temperature switch or wiring.
Err2	Furnace ran out of fuel during normal	•	Hopper Empty.
	operation.	• Auger output failure or jam.
		• Flame of fuel quality caused fire to burn too slowly or go out.
		• Electircal Open in low temperature switch or wiring.

Err3	The furnace was unable to reach the	• Flame or Fuel quality caused the fire to burn too slowly or go
	Room Fan On temperature within the	out.
	startup time.	•	Auger output failure or jam Hopper empty on startup.
Err4	The power failed while the furnace was	• Electrical Open in low temperature switch or wiring.
	hot, and when power was restored, the	•	Power loss
	fire was out.	• Electrical Open in low temperature switch or wiring.
Err5	The Auger output fuse has blown.	• Auger motor jammed or bad.

Err6	The Agitator output fuse has blown.	• Agitator motor jammed or bad.
Err7	The Draft Fan (Exhaust Fan) output fuse	• Draft Fan motor jammed or bad.
	has blown.
Err8	The Room Fan blower output fuse has	• Room fan motor jammed or bad.
	blown.

Display Indicators

Several situations or events are indicated in normal operation by blinking display indicators or segments in the display:

Flashing On Indicator: This means that the stove is in the “Start Up” state waiting for either a 3 minute timeout to begin burning or for the stove to reach the warm temperature whichever comes first.

Flashing Off Indicator: This indicates that the stove is in the “Shutdown” state waiting for the OFF button, or for a 15 minute period after the stove was turned off, or for the stove to cool down, or for the door to be closed.

Flashing dash in Heat Range Display: This indicates that the stove is in the normal run mode and is ramping from the current heat range setting to the target heat range setting. Once the ramp is complete, the dash will stop flashing. For ramping from heat range 1 to 9, the default time is 12 minutes (with a 90 second ramp time).

Flashing Automatic Mode Indicator: This indicates that the stove is in normal operation and is running in the automatic mode. However, either the Draft Fan or Auxiliary setting is manually configured.

Flashing Draft Fan Setting Indicator: This indicates that the stove is in normal operation and that the vacuum sensor detects a loss of pressure either because the door is open or because there is a negative pressure in the room with respect to the exhaust.

Factory Defaults

To return the control to its original factory default settings, press and hold the AUX UP and AUX DOWN buttons together for three seconds.

USSC

6039HF specifications

The United States Stove 6039HF is a high-efficiency, modern wood-burning stove designed for homeowners seeking to enhance their heating efficiency while minimizing their environmental impact. This unit is particularly known for its cutting-edge features and superior performance, making it a popular choice among eco-conscious consumers.

One of the key features of the 6039HF is its high-efficiency rating, which allows it to generate heat using minimal wood. This stove is outfitted with a secondary combustion system, which enhances the burning of gases and particulates, resulting in reduced emissions. Thanks to this technology, the 6039HF achieves an impressive efficiency rate that often exceeds 80%, making it one of the more environmentally friendly options on the market.

The stove's design incorporates an air wash system, which maintains clean glass for an unobstructed view of the fire. This feature not only adds to the aesthetic appeal of the 6039HF, but it also contributes to a cleaner burn by keeping the glass clear of soot and creosote buildup.

In terms of construction, the United States Stove 6039HF is built with high-quality materials intended for durability and longevity. The stove's firebox is constructed from heavy-duty steel, allowing it to withstand high temperatures and ensuring a long lifespan. Additionally, the large viewing window is crafted from high-temperature ceramic glass, which is designed to withstand the intense heat generated during operation.

The versatility of the 6039HF is another selling point. It is capable of heating areas up to 2,000 square feet, making it suitable for various spaces, from large living rooms to expansive cabins. With a heating capacity of up to 75,000 BTUs, it can effectively keep a home warm during the coldest months.

Moreover, the 6039HF features an easy-to-use ash removal system, which simplifies maintenance. The integrated ash pan collects debris, making it easy for users to clean and maintain the stove, ensuring optimal performance over time.

Overall, the United States Stove 6039HF combines efficiency, durability, and user-friendly features, making it an excellent choice for those looking to heat their spaces sustainably and effectively. With modern technology and robust construction, this wood stove is an investment in both comfort and eco-friendliness.