HP LP2275w 22-inch manual Safety and Maintenance Guidelines, Important Safety Information

Page 10

2 Safety and Maintenance Guidelines

Important Safety Information

A power cord is included with the monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with the monitor, refer to the Power Cord Set Requirements on page 46 in Appendix C.

WARNING! To reduce the risk of electric shock or damage to the equipment:

Do not disable the power cord grounding feature. The grounding plug is an important safety feature.

Plug the power cord in a grounded (earthed) outlet that is easily accessible at all times.

Disconnect power from the product by unplugging the power cord from the electrical outlet.

For your safety, do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the electrical outlet, grasp the cord by the plug.

To reduce the risk of serious injury, read the Safety and Comfort Guide. It describes proper workstation, setup, posture, and health and work habits for computer users, and provides important electrical and mechanical safety information. This guide is located on the Web at http://www.hp.com/ergo and/or on the documentation CD, if one is included with the monitor.

CAUTION: For the protection of the monitor, as well as the computer, connect all power cords for the computer and its peripheral devices (such as a monitor, printer, scanner) to some form of surge protection device such as a power strip or Uninterruptible Power Supply (UPS). Not all power strips provide surge protection; the power strips must be specifically labeled as having this ability. Use a power strip whose manufacturer offers a Damage Replacement Policy so you can replace the equipment, if surge protection fails.

Use the appropriate and correctly sized furniture designed to properly support your HP LCD monitor.

WARNING! LCD monitors that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, or carts may fall over and cause personal injury.

Care should be taken to route all cords and cables connected to the LCD monitor so that they can not be pulled, grabbed, or tripped over.

4

Chapter 2 Safety and Maintenance Guidelines

Image 10
Contents HP LP2275w and LP2475w LCD Monitors Page About This Guide Iv About This Guide Table of contents Appendix a Troubleshooting Product Features HP LP2275w ModelHP LP2475w Model Page Safety and Maintenance Guidelines Important Safety InformationCleaning the Monitor Maintenance GuidelinesShipping the Monitor Setting Up the Monitor Installing the Monitor Pedestal BaseHP LP2275w Model Rear Components1HP LP2275w Rear Components HP LP2475w Model 2HP LP2475w Rear ComponentsSelecting and Connecting the Signal Cables 3Signal Connectors and CablesComponent Y Pb Connecting the Monitor Power Connecting USB Devices 5Connecting USB Devices Setting Up the MonitorAdjusting the Monitor Cable Management9Adjusting the Height Setting Up the Monitor Turning on the Monitor 10Pivoting the MonitorUsing the Accessory Rails Removing the Monitor Pedestal BaseMounting the Monitor 14Installing the Quick Release Setting Up the Monitor Locating the Rating Labels 15Inserting the Monitor Panel into the Quick ReleaseInformation File Operating the MonitorSoftware and Utilities Image Color Matching FileInstalling from the CD Installing the .INF and .ICM FilesDownloading from the Worldwide Web Using the Auto-Adjustment Function Front Panel Controls 1HP LP2275w Monitor Front Panel Controls2HP LP2475w Monitor Front Panel Controls PIP/POPAdjusting the Monitor Settings Using the On-Screen Display MenuOSD Menu 3OSD Menu Set On Time-sets the time you want the monitor to wake Factory default is Automatic Input Scan Using the HP Display Assistant Utility Optimizing Digital ConversionSleep Timer Mode Identifying Monitor ConditionsInstalling the HP Display LiteSaver Software HP Display LiteSaver4HP Display LiteSaver Configuration Options Changing the Color TemperatureSRGB Support Installing the sRGB ICM File for Microsoft Windows Vista Troubleshooting Solving Common ProblemsAppendix a Troubleshooting Using the Worldwide Web Preparing to Call Technical Support Technical Specifications Table B-1HP LP2275w SpecificationsTable B-2HP LP2475w Specifications Appendix B Technical Specifications Table B-3HP LP2275w Factory Preset Modes Recognizing Preset Display ResolutionsTable B-4HP LP2475w Factory Preset Modes Entering User Modes Energy Saver Feature Modifications Agency Regulatory NoticesFederal Communications Commission Notice CablesAvis Canadien Canadian NoticeEuropean Union Regulatory Notice Japanese Power Cord Requirements Japanese Notice Korean Notice Power Cord Set RequirementsGerman Ergonomics Notice Energy Star Compliance Product Environmental NoticesMaterials Disposal Restriction of Hazardous Substances RoHS LCD Monitor Quality and Pixel Policy