HP LP2275w 22-inch manual Turning on the Monitor, 10Pivoting the Monitor

4.Pivot the monitor clockwise from landscape to portrait orientation viewing to adapt to your application.

Figure 3-10Pivoting the Monitor

NOTE: To view information on the screen in portrait mode, you will need to install the Pivot Pro software included on the software and documentation CD. The position of the OSD menu can also be rotated to portrait mode. To rotate the OSD menu, press the Menu button on the monitor's front panel, then select OSD Control > OSD Rotation.

Turning on the Monitor

1.Press the power switch to turn on the computer.

2.Verify the master power switch on the rear of the monitor is in the on (I) position.

3.Press the power button on the front of the monitor.

CAUTION: Burn-in image damage may occur on monitors that display the same static image on screen for a prolonged period of time.* To avoid burn-in image damage on the monitor screen, you should always activate a screen saver application or turn off the monitor when it is not in use for a prolonged period of time. Image retention is a condition that may occur on all LCD screens.

* A prolonged period of time is 12 consecutive hours of non-use.

NOTE: If pressing the power button has no effect, the Power Button Lockout feature may be enabled. To disable this feature, press and hold the monitor power button for 10 seconds.

Turning on the Monitor 15