Omega Vehicle Security OM5-C manual

OM5-BP-8-C 8 POSITION ANALOG I/O BACKPANEL, NON-MULTIPLEXED

DESCRIPTION

The OM5-BP-8-C analog module mounting board has a capacity of eight analog input and/or output modules in any combination. It can be mounted on the OMX-1363-C 19-inch metal rack. A separate analog signal path is provided for each channel and each channel’s signal is accessible at redundant 26-pin connectors. The module output switch is continuously “on” when using this backpanel and all eight module outputs are simulta- neously accessible to high-speed data acquistion (ADC) boards.

A temperature sensor is mounted on each channel to provide cold junction compensation for thermocouple input modules (See Figure 14 for Schematic-

On-board jumpers permit paralleling two OM5-BP-8-C boards to form a OM5-BP-16-C equivalent. An additional set of inter-channel bridge jumpers permits connecting an input module’s output to an output module’s input, providing two levels of isolation (Figures 13, 14).

Jumpers on the OM5-BP-8-C permit user selection of low (i.e. channels 0- 7) or high (i.e. channels 8-15) addresses.

SPECIFICATIONS

Operating Temperature:	–40°C to +85°C
	95% relative humidity, non-condensing

Interface Connector:
Field	High Density Screw Clamp, 14 AWG Max
Logic	26-pin, male header connector

Tolerance: ±0.020" (±0.50mm)

10.0"

(254.0mm)

9.7"

(246.3mm)

26 Conductor

9.5"

5.8"

(241.3mm)

Male Pin

(1)

(147.3mm)

Connectors P1, P2

	(32.4mm)
0.15"	1.275"
0.15"

(3.8mm)

Swaged

Standoff

Thru Hole

0.15" (3.8mm) Dia.

(6)

0.75"

(19.1mm)

2.25"

(57.2mm)

3.15"

(80.2mm)

	P1 P2	L H
(88.1mm)	(79.5mm)	J12
		JP7
		JP1
3.47"	3.05"	J5
3.47"	3.05"	J1 J2 J3 J4
	Pin 2	+5VDC Supply
	Pin 1	Sockets for Current
	Pin 1	Conversion Resistors, OMX-1362-C
	Pin 2	Conversion Resistors, OMX-1362-C
	Pin 2
	Pin 1

NOTES: (1) Connector is Berg 65863-075 or equivalent. Mating connector is AMP 49958-6 or equivalent. Connectors P1 and P2 are wired in parallel for “Daisy Chaining” up to 8 boards.

10.32X 0.40

Ground Lug, Including Nut and Lockwasher

OMX-CJC-C

Cold Junction

Compensation Circuit

Barrier Strips for

Field Analog Signal I/O Termination. (8)

FIGURE 13. OM5-BP-8-C Analog I/O Backpanel.

ELECTRICAL

ADDRESS SELECTION

Module addresses may be selected as low (channels 0-7) or high (channels 8-15) using the sets of 3 pins labeled J5 through J12. Place a jumper over the two pins closest to the ribbon cable connectors, P1 and P2, to select a low address (factory configuration) or over the two pins furthest from the ribbon cable connectors, P1 and P2, to select a high address.

ADJACENT CHANNEL JUMPERS

Adjacent channels may be connected together to provide an isolated output signal from an isolated input module, providing two levels of 1500V isolation. This capability is provided with the seven jumpers labeled JP1– JP7.

OM5-C specifications

Introducing the Omega Vehicle Security OM5-C, a cutting-edge vehicle security system designed to provide unparalleled protection against theft and unauthorized access. The OM5-C is engineered for modern vehicles, integrating advanced technologies to safeguard your investment while enhancing convenience and peace of mind.

One of the standout features of the OM5-C is its advanced immobilizer technology. This feature ensures that even if a thief manages to access your vehicle, they will be unable to start the engine without the proper authentication. The OM5-C uses a sophisticated algorithm that communicates with a unique key fob, making it virtually impossible for unauthorized users to bypass the system.

Another significant characteristic of the Omega Vehicle Security OM5-C is its real-time GPS tracking system. Users can remotely monitor their vehicle's location through a dedicated mobile app, which allows for instant alerts if your vehicle is moved without authorization. This not only aids in recovery in the event of theft but also provides peace of mind knowing you can always keep an eye on your vehicle’s whereabouts.

The OM5-C also boasts motion sensors that can detect any unauthorized movement, triggering an alarm to deter potential thieves. In addition, the system features advanced diagnostic capabilities, allowing users to receive notifications about the status of various vehicle components, further ensuring that everything is functioning within normal parameters.

In terms of installation, the Omega Vehicle Security OM5-C is designed for ease and efficiency. It can be installed in a wide variety of vehicles, making it versatile for different types of users. The system is compatible with both standard and luxury vehicles, ensuring comprehensive security solutions for everyone.

The user-friendly interface provided by the OM5-C mobile app allows for easy customization of alerts and settings, allowing users to tailor the system to their specific needs. Users can seamlessly manage alarm settings, track vehicle movements, and even pre-load emergency contacts directly from their smartphones.

Overall, the Omega Vehicle Security OM5-C stands out as a premier choice for vehicle protection, combining innovative technology with user-centric features. This state-of-the-art security system not only defends against theft but also enhances the overall security experience for vehicle owners, making it an invaluable investment for safeguarding automobiles.