Omega Vehicle Security OM5-C manual OM5-BP-SKT-C Analog Module Evaluation Board

Page 30

OM5-BP-SKT-C ANALOG MODULE EVALUATION BOARD

DESCRIPTION

The OM5-BP-SKT-C is a single channel board with a test socket for OM5 module evaluation (Figure 19). All signal input/output, control, and power connections are connected to terminal blocks for ease of user access. A cold junction temperature sensor circuit is included for evaluation of thermo- couple modules. (See Figure 20 for schematic).

The OM5-BP-SKT-C is mechanically compatible with DIN rail mounting using the following elements:

2OM7-DIN-SF base elements with snap foot

2OM7-DIN-SE side elements

4OM7-DIN-CP connection pins

Two jumpers are provided for customer use. The first, J1, provides a current path between +5V Power Common (module pin 16) and I/O Common (module pin 19). A path must exist between the host control logic power common and module I/O Common for proper operation of the module output switch or track-and-hold circuit. If this connection exists elsewhere in the system, jumper J1 should be removed since possible ground loops could exist. Other connections of power ground and signal ground usually occur at the A/D or D/A converter of the host measurement system.

Jumper J2 is used in the cold junction compensation circuit. If it is installed, the compensation circuit is enabled and will provide the proper compensa- tion voltage to correct for the thermoelectric effect at the +In and –In screw terminals. If an external simulation voltage is desired for cold junction compensation, J2 should be removed. The external voltage is applied at the sockets labled CJC+ and CJC–. An external voltage of 510.0 mV corresponds to an ambient temperature of +25 °C. The transfer function of the onboard compensation circuit is VCJC = 0.510 –0.0025(T–25)V.

 

 

2.85"

 

0.25" (6.4mm) Typical

(72.4mm)

 

 

0.25"

 

(6.4mm)

 

Typical

 

 

Control

Local I/O

 

RD EN\

VOUT

 

WR EN\

I/O COM

 

Reserved

VIN

 

PCOM

I/O COM

 

TB1

TB2

 

+5V

J1

 

 

4.25"

PCOM

+

(108mm)

 

 

 

TB3

CJC

 

 

 

 

–

 

 

J2

 

 

OMX-1362-C

 

 

OMX-CJC-C

 

 

TB4

 

–EXC

+EXC

 

–In

+In

FIGURE 19. OM5-BP-SKT-C Evaluation Board Dimensions And Pin Layout.

TB1

23

TB2

22

RD EN\

21

 

20

 

WR EN\

19

 

18

 

Reserved

17

 

16

 

PCOM

OM5

PCOM

 

 

I/O COM

 

 

PCOM

6 +In

 

–In 5

 

 

4 +EXC

 

 

–EXC 3

J1

 

2 +SEN

+5

–SEN 1

 

 

 

TB3

 

PCOM

 

J2

+

 

 

PCOM

 

CJC

 

–

 

DZ1

LED

OMX-CJC-C

PCOM

OMX-1362-C

NOTES:

1.J1 and J2 are factory installed.

2.SCMXCJC is a CJC temperature sensor.

3. Resistor SCMXR1 is an optional I/V conversion

TB4

 

 

resistor for current inputs, not factory installed.

–EXC –In +In +EXC

VOUT

I/O COM

VIN

I/O COM

I/O COM

FIGURE 20. OM5-BP-SKT-C Evaluation Board Schematic.

48

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Page OMEGAnetSM On-Line Service Internet e-mail Info@omega.com Table of Contents OM5-WMV/WV Analog Voltage Input Modules, Wide BandwidthOrdering Information OM5-WMV OM5-WVWire Transmitter Interface Modules OM5-TXModel Inputrange Outputrange OM5-TXOM5-DT General Purpose Input Modules, with DC ExcitationModel Maximum Input Output OM5-DTOM5-IFI Frequency Input ModulesOM5-IFI-1K-C OM5-IFI-3K-COM5-IFI-5K-C OM5-LTC Linearized Thermocouple Input ModulesOM5-LTC-J3-C OM5-LTC-J1-COM5-LTC-J2-C OM5-LTC-J4-COM5-AV Voltage Output ModulesPoles of Filtering Model Inputrange OM5-AVModule Dimensions and Pinouts OM5Accessories For OM5 Analog Modules SpecificationsSchematic Fusing P1 and P2 ConnectorPower Adjacent Channel JumpersOM5-BP-16-MUX-C Analog I/O Backpanel OM5-BP-16-MUX-C Schematic P1 Connector Address Selection15, Expanded OM7-DIN-SF OM7-DIN-SEOM7-DIN-CP OM5-BP-2-C Schematic OM5-BP-8-C 8 Position Analog I/O BACKPANEL, NON-MULTIPLEXED BP-8-C Schematic OM5-BP-8-MUX-C 8 Position Analog I/O BACKPANEL, Multiplexed OM5-BP-8-MUX-C OMX-1363-C 19 Inch Metal Mounting Rack OM5-BP-SKT-C Analog Module Evaluation Board OM5-1315-XX-C, OMX-CAB-01-C Interface Cables OMX-CAB-01-COMX-CJC-C Encapsulated Cold Junction Compensation OMX-955-C, OMX-955-220-C Power Supplies OMX-977-C, OMX-977-220-C Power Supplies European EMC Directive Compliant Designed for Industrial Plant EnvironmentsRTD Alpha Coefficients OM5-IMV/IV Analog Voltage Input Modules, Narrow BandwidthModel Input Range Output Range Accepts Milliamp Level Signals High Level Voltage Outputs OM5-IIAnalog Current Input Modules Model Input Range Output Range Bandwidth OM5-IIInterfaces RMS Voltage 0 300V or RMS Current 0 5A OM5-IACIsolated True RMS Input Modules Vrms Continuous Transformer Based IsolationModel OM5-IAC-1B-COM5-IAC Linearized 2- or 3-Wire RTD Input Modules Linearizes RTD Signal High Level Voltage OutputsOM5-IP/IC/IN OM5-IP/IC/IN Model Input RangeOM5-IP4/IC4/IN4 Linearized 4-Wire RTD Input Modules OM5-IP4/IC4/IN4 Block DiagramOM5-IP4/IC4/IN4 ModelOM5-PT Potentiometer Input ModulesModel Input Range OM5-PTOM5-ITC Thermocouple Input ModulesModel Type Input Range ACCURACY1OM5-WBS Strain Gage Input Modules, Wide BandwidthOrdering Input Range ExcitationUnipolar or Bipolar Current Output OM5-IVICurrent Output Modules Accepts High Level Voltage or Process Current InputInput Range Output Range Bandwidth WARRANTY/DISCLAIMER PurchasedTemperature

OM5-C specifications

Introducing the Omega Vehicle Security OM5-C, a cutting-edge vehicle security system designed to provide unparalleled protection against theft and unauthorized access. The OM5-C is engineered for modern vehicles, integrating advanced technologies to safeguard your investment while enhancing convenience and peace of mind.

One of the standout features of the OM5-C is its advanced immobilizer technology. This feature ensures that even if a thief manages to access your vehicle, they will be unable to start the engine without the proper authentication. The OM5-C uses a sophisticated algorithm that communicates with a unique key fob, making it virtually impossible for unauthorized users to bypass the system.

Another significant characteristic of the Omega Vehicle Security OM5-C is its real-time GPS tracking system. Users can remotely monitor their vehicle's location through a dedicated mobile app, which allows for instant alerts if your vehicle is moved without authorization. This not only aids in recovery in the event of theft but also provides peace of mind knowing you can always keep an eye on your vehicle’s whereabouts.

The OM5-C also boasts motion sensors that can detect any unauthorized movement, triggering an alarm to deter potential thieves. In addition, the system features advanced diagnostic capabilities, allowing users to receive notifications about the status of various vehicle components, further ensuring that everything is functioning within normal parameters.

In terms of installation, the Omega Vehicle Security OM5-C is designed for ease and efficiency. It can be installed in a wide variety of vehicles, making it versatile for different types of users. The system is compatible with both standard and luxury vehicles, ensuring comprehensive security solutions for everyone.

The user-friendly interface provided by the OM5-C mobile app allows for easy customization of alerts and settings, allowing users to tailor the system to their specific needs. Users can seamlessly manage alarm settings, track vehicle movements, and even pre-load emergency contacts directly from their smartphones.

Overall, the Omega Vehicle Security OM5-C stands out as a premier choice for vehicle protection, combining innovative technology with user-centric features. This state-of-the-art security system not only defends against theft but also enhances the overall security experience for vehicle owners, making it an invaluable investment for safeguarding automobiles.
Top Page Image Contents