Omega Vehicle Security OM5-C manual OM5-AV, Voltage Output Modules, Poles of Filtering

Page 14

OM5-AV

Voltage Output Modules

FEATURES

●ACCEPTS HIGH LEVEL VOLTAGE INPUTS TO ±10V

●PROVIDES HIGH LEVEL VOLTAGE OUTPUTS TO ±10V

●1500 VOLT TRANSFORMER ISOLATION

●ANSI/IEEE C37.90.1e-1989 TRANSIENT PROTECTION

●5 POLES OF FILTERING

●110dB CMR

●400Hz SIGNAL BANDWIDTH

●±0.05% ACCURACY

●±0.02% LINEARITY

●MIX AND MATCH OM5 TYPES ON BACKPANEL

●CSA CERTIFIED, FM APPROVED, CE COMPLIANT

DESCRIPTION

Each OM5-AV voltage output module provides a single channel of analog output. The track-and-hold circuit in the input stage can be operated in a hold mode where one DAC can supply many output modules, or a track mode where one DAC is dedicated to each module. In addition to the track-and-hold circuit, each module provides signal buffering, isolation, filtering, and conversion to a high level voltage output.

Setting of the track or hold mode is controlled by the logic state of WR EN\, module pin 23. When pin 23 is low, the track mode is enabled. If pin 23 is open or high, the hold mode is enabled. The module is designed with a completely isolated computer side circuit which can be floated to ±50V from Power Common, pin 16. This complete isolation means that no connection is required between I/O Common and Power Common for proper operation of the track and hold circuit. For a low state, simply connect pin 23, the Write- Enable pin, to I/O Common, pin 19.

The OM5-BP-MUX-C backpanels allow host computer control of the WR EN\ control line, which allows multiplexing of one host DAC to up to 64 OM5-AV output modules. During power up, the output remains 0V output for 100ms, which allows the track-and-hold circuit to be initialized.

+EXC

+Out

4

4 NC

6

Isolation Barrier

Track

&

Hold

Range Select

18

19

VIN

RLOAD

–Out

–EXC

3

2

1

5

3 NC

Surge

Suppression

and

Protection

+V

–V

I/O Common

23

WR EN\

Isolated

Computer-Side

Power

Backpanel

Term Block

1

NC

2

NC

Isolated

Field-Side

Power

Power

Oscillator

17

+5V

16

Power Common

FIGURE 1. OM5-AV Block Diagram.

32

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Page OMEGAnetSM On-Line Service Internet e-mail Info@omega.com Table of Contents OM5-WMV/WV Analog Voltage Input Modules, Wide BandwidthOrdering Information OM5-WMV OM5-WVWire Transmitter Interface Modules OM5-TXModel Inputrange Outputrange OM5-TXOM5-DT General Purpose Input Modules, with DC ExcitationModel Maximum Input Output OM5-DTOM5-IFI Frequency Input ModulesOM5-IFI-5K-C OM5-IFI-1K-COM5-IFI-3K-C OM5-LTC Linearized Thermocouple Input ModulesOM5-LTC-J3-C OM5-LTC-J1-COM5-LTC-J2-C OM5-LTC-J4-CPoles of Filtering OM5-AVVoltage Output Modules Model Inputrange OM5-AVModule Dimensions and Pinouts OM5Accessories For OM5 Analog Modules SpecificationsSchematic Fusing P1 and P2 ConnectorPower Adjacent Channel JumpersOM5-BP-16-MUX-C Analog I/O Backpanel OM5-BP-16-MUX-C Schematic 15, Expanded P1 ConnectorAddress Selection OM7-DIN-CP OM7-DIN-SFOM7-DIN-SE OM5-BP-2-C Schematic OM5-BP-8-C 8 Position Analog I/O BACKPANEL, NON-MULTIPLEXED BP-8-C Schematic OM5-BP-8-MUX-C 8 Position Analog I/O BACKPANEL, Multiplexed OM5-BP-8-MUX-C OMX-1363-C 19 Inch Metal Mounting Rack OM5-BP-SKT-C Analog Module Evaluation Board OM5-1315-XX-C, OMX-CAB-01-C Interface Cables OMX-CAB-01-COMX-CJC-C Encapsulated Cold Junction Compensation OMX-955-C, OMX-955-220-C Power Supplies OMX-977-C, OMX-977-220-C Power Supplies European EMC Directive Compliant Designed for Industrial Plant EnvironmentsRTD Alpha Coefficients OM5-IMV/IV Analog Voltage Input Modules, Narrow BandwidthModel Input Range Output Range Analog Current Input Modules Accepts Milliamp Level Signals High Level Voltage OutputsOM5-II Model Input Range Output Range Bandwidth OM5-IIInterfaces RMS Voltage 0 300V or RMS Current 0 5A OM5-IACIsolated True RMS Input Modules Vrms Continuous Transformer Based IsolationOM5-IAC ModelOM5-IAC-1B-C OM5-IP/IC/IN Linearized 2- or 3-Wire RTD Input ModulesLinearizes RTD Signal High Level Voltage Outputs OM5-IP/IC/IN Model Input RangeOM5-IP4/IC4/IN4 Linearized 4-Wire RTD Input Modules OM5-IP4/IC4/IN4 Block DiagramOM5-IP4/IC4/IN4 ModelOM5-PT Potentiometer Input ModulesModel Input Range OM5-PTOM5-ITC Thermocouple Input ModulesModel Type Input Range ACCURACY1OM5-WBS Strain Gage Input Modules, Wide BandwidthOrdering Input Range ExcitationUnipolar or Bipolar Current Output OM5-IVICurrent Output Modules Accepts High Level Voltage or Process Current InputInput Range Output Range Bandwidth WARRANTY/DISCLAIMER PurchasedTemperature

OM5-C specifications

Introducing the Omega Vehicle Security OM5-C, a cutting-edge vehicle security system designed to provide unparalleled protection against theft and unauthorized access. The OM5-C is engineered for modern vehicles, integrating advanced technologies to safeguard your investment while enhancing convenience and peace of mind.

One of the standout features of the OM5-C is its advanced immobilizer technology. This feature ensures that even if a thief manages to access your vehicle, they will be unable to start the engine without the proper authentication. The OM5-C uses a sophisticated algorithm that communicates with a unique key fob, making it virtually impossible for unauthorized users to bypass the system.

Another significant characteristic of the Omega Vehicle Security OM5-C is its real-time GPS tracking system. Users can remotely monitor their vehicle's location through a dedicated mobile app, which allows for instant alerts if your vehicle is moved without authorization. This not only aids in recovery in the event of theft but also provides peace of mind knowing you can always keep an eye on your vehicle’s whereabouts.

The OM5-C also boasts motion sensors that can detect any unauthorized movement, triggering an alarm to deter potential thieves. In addition, the system features advanced diagnostic capabilities, allowing users to receive notifications about the status of various vehicle components, further ensuring that everything is functioning within normal parameters.

In terms of installation, the Omega Vehicle Security OM5-C is designed for ease and efficiency. It can be installed in a wide variety of vehicles, making it versatile for different types of users. The system is compatible with both standard and luxury vehicles, ensuring comprehensive security solutions for everyone.

The user-friendly interface provided by the OM5-C mobile app allows for easy customization of alerts and settings, allowing users to tailor the system to their specific needs. Users can seamlessly manage alarm settings, track vehicle movements, and even pre-load emergency contacts directly from their smartphones.

Overall, the Omega Vehicle Security OM5-C stands out as a premier choice for vehicle protection, combining innovative technology with user-centric features. This state-of-the-art security system not only defends against theft but also enhances the overall security experience for vehicle owners, making it an invaluable investment for safeguarding automobiles.
Top Page Image Contents