6.When the CIP values have been adjusted to the desired setting, press and hold the Return 
button for 3 seconds until the programming screen bellow is displayed.
7.Using the TrailerLink™ system programming cable (Part Number K092501), connect the Tool to the TrailerLink system harness. Refer to the TrailerLink system manual (BW2920) for instructions.
ECU
HAND
TOOL
REMOVE LED
INSERT
HARNESS
8.Press the Check 
button to initiate programming. You may also press the Return 
button to return to the CIP adjustment screen or press the 
button to return to the main menu.
9.Once programming has been initiated, the following screen appears.
10.After successful programming, this screen is shown.
11.After programming, press the Return 
button to exit to the main menu.
Page 15