9. If a sensor failed to activate, this screen will be appear:
If this occurs, ensure that the Tool is placed at the correct position around the tire and retry the sensor activation by pressing the Learn 
button.
10.If, while learning a particular wheel position, a tire pressure sensor ID code is received that is already used in a different position, this "Duplicate ID" error screen is displayed:
11.Pressing the 
button will delete the received ID and the screen will go to the previously learned position. Press the Learn 
button to learn the tire sensor into the position again.
12.Using the programming cable (Part Number K092501), connect the Tool to the TrailerLink™ by Bendix CVS system harness. Refer to the TrailerLink system manual for instructions.
ECU
HAND
TOOL
REMOVE LED
INSERT
HARNESS
13.Press the Check 
button to begin downloading the new tire sensor IDs into the TrailerLink™ by Bendix CVS system receiver.
Page 18