2.18.2 Installing Windows® 7 / 7
If you want to install Windows ® 7 / 7
Using SATA3 HDDs with NCQ and Hot Plug functions (AHCI mode)
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY 
Advanced screen 
Storage Conf guration. B. Set the “SATA Mode” option to [AHCI].
STEP 2: Install Windows® 7 / 7
Using SATA3 HDDs without NCQ and Hot Plug functions (IDE mode)
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY 
Advanced screen 
Storage Conf guration. B. Set the “SATA Mode” option to [IDE].
STEP 2: Install Windows® 7 / 7
2.19 Untied Overclocking Technology
This motherboard supports Untied Overclocking Technology, which means during overclocking, FSB enjoys better margin due to f xed PCI / PCIE buses. Before you enable Untied Overclocking function, please enter “Overclock Mode” option of UEFI setup to set the selection from [Auto] to [Manual]. Therefore, CPU FSB is untied during overclocking, but PCI / PCIE buses are in the f xed mode so that FSB can operate under a more stable overclocking environment.
Please refer to the warning on page 8 for the possible overclocking risk before you apply Untied Overclocking Technology.
47