ASRock 960GM-S3 FX manual I/O Panel 960GM-GS3 FX, LAN Port LED Indications

Page 12

1.4 I/O Panel (960GM-GS3 FX)

1

2

3

4

5

6

 

10

9

8

 

7

1

PS/2 Mouse Port (Green)

 

6

Microphone (Pink)

2

USB 2.0 Ports (USB23)

 

7

USB 2.0 Ports (USB01)

* 3

RJ-45 Port

 

 

8

VGA Port

4

Line In (Light Blue)

 

9

COM Port

5

Line Out (Lime)

 

10

PS/2 Keyboard Port (Purple)

*There are two LED next to the LAN port. Please refer to the table below for the LAN port LED indications.

LAN Port LED Indications

Activity/Link LED

 

 

SPEED LED

Status

Description

 

Status

Description

Off

No Activity

 

Off

10Mbps connection

Blinking Data Activity Orange 100Mbps connection

Green 1Gbps connection

ACT/LINK SPEED

LED LED

LAN Port

*To enable Multi-Streaming function, you need to connect a front panel audio cable to the front panel audio header. Please refer to below steps for the software setting of Multi-Streaming.

For Windows® XP:

After restarting your computer, you will find “Mixer” tool on your system. Please select “Mixer

ToolBox”

, click “Enable playback multi-streaming”, and click “ok”. Choose “2CH” or

“4CH” and then you are allowed to select “Realtek HDA Primary output” to use Rear Speaker and Front Speaker, or select “Realtek HDA Audio 2nd output” to use front panel audio. Then reboot your system.

For Windows® 7 / VistaTM:

After restarting your computer, please double-click “Realtek HD Audio Manager” on the system tray. Set “Speaker Configuration” to “Quadraphonic” or “Stereo”. Click “Device advanced settings”, choose “Make front and rear output devices playbacks two different audio streams simultaneously”, and click “ok”. Then reboot your system.

12

Image 12
Contents 960GM-GS3 FX 960GM-S3 FX Copyright Notice DisclaimerContents Bios Setup Utility Package Contents IntroductionSpecifications Connector Bios FeatureUnique Feature Rear Panel I/OHardware MonitorCertifications Page Page Motherboard Layout 960GM-GS3 FX / 960GM-S3 FX I/O Panel 960GM-GS3 FX LAN Port LED IndicationsI/O Panel 960GM-S3 FX Installation Pre-installation PrecautionsCPU Installation Installation of CPU Fan and HeatsinkInstallation of Memory Modules Dimm Installing a DimmInstalling an expansion card Expansion Slots PCI and PCI Express SlotsPcie slots Multi Monitor Feature For Windows XP / XP 64-bit OSFor Windows 7 / 7 64-bit / VistaTM / VistaTM 64-bit OS Jumpers Setup PS2USBPW1Onboard Headers and Connectors IDE1USB 2.0 Headers CPU Fan Connector ATX 12V Power Connector Sataii Hard Disk Setup Guide Western DigitalWhat is Hot Plug Function? What is Hot Swap Function?Hot Plug and Hot Swap Functions for Sata / Sataii HDDs Sata / Sataii HDD Hot Plug Feature and Operation Guide Points of attention, before you process the Hot PlugHow to Hot Plug a Sata / Sataii HDD How to Hot Unplug a Sata / Sataii HDDDriver Installation Guide Installing Windows XP / XP 64-bit With RAID FunctionsSet up Bios Make a Sata / Sataii Driver DisketteUse RAID Installation Guide to set RAID configuration Installing Windows XP / XP 64-bit Without RAID Functions Install Windows XP / XP 64-bit OS on your system Untied Overclocking Technology Bios Menu Bar Navigation Keys Main ScreenEZ Overclocking Load Optimized CPU OC Setting Load Optimized CPU OC Setting Press EnterOC Tweaker Screen 960GM-S3 FXLoad Optimized mGPU OC Setting CPU Configuration Overclock ModeBoot Failure Guard Boot Failure Guard CountMemory Configuration Memory Clock Multiplier/Voltage ChangeCPU Frequency Multiplier Processor VoltagePower Down Enable Command RateMemory Timing Bank InterleavingChipset Settings Onboard GPU Clock Override Would you like to save current setting user defaults?Onboard GPU Clock MGPU VoltageCPU Configuration Advanced ScreenASRock Instant Flash CPU Configuration Cool n Quiet EnabledCool ‘n’ Quiet Secure Virtual MachineChipset Configuration Acpi Configuration Storage Configuration Sata Operation ModeIDE Device Configuration Onboard Sata Controller EnabledLBA/Large Mode PIO ModeDMA Mode Block Multi-Sector TransferPCIPnP Configuration PCI Latency TimerLatency Timer PCI IDE BusMasterFloppy Configuration Super IO ConfigurationOnBoard Floppy Controller Serial Port AddressParallel Port Mode ECP Mode DMA ChannelEPP Version Parallel Port IRQUSB Configuration CPU Fan Setting Chassis Fan 1 SettingHardware Health Event Monitoring Screen Boot Screen Full Screen LogoAddOn ROM Display Boot Logo Boot From Onboard LANBoot Up Num-Lock Change Supervisor PasswordExit Screen Install Operating System Support CD InformationRunning The Support CD Drivers Menu
Related manuals
Manual 159 pages 14.49 Kb