ASRock 890GMH/USB3 manual PCIPnP Configuration, Floppy Configuration, PCI Latency Timer

3.4.5 PCIPnP Configuration

BIOS SETUP UTILITY

Advanced

Advanced PCI / PnP Settings

PCI	Latency Timer	[32]
PCI	IDE BusMaster	[Enabled]

Value in units of PCI clocks for PCI device latency timer register.

	Select Screen
	Select Item
+-	Change Option
F1	General Help
F9	Load Defaults
F10	Save and Exit
ESC	Exit

v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.

Setting wrong values in this section may cause the system to malfunction.

PCI Latency Timer

The default value is 32. It is recommended to keep the default value unless the installed PCI expansion cards’ specifications require other settings.

PCI IDE BusMaster

Use this item to enable or disable the PCI IDE BusMaster feature.

3.4.6 Floppy Configuration

In this section, you may configure the type of your floppy drive.

	BIOS SETUP UTILITY
Advanced
Floppy Configuration		Select the type of
		floppy drive
Floppy A	[1.44 MB 312"]	connected to the
		system.
			Select Screen
			Select Item
		+-	Change Option
		F1	General Help
		F9	Load Defaults
		F10	Save and Exit
		ESC	Exit
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.

5 5