ASRock 890GMH/USB3 manual USB Configuration, USB Controller, USB 2.0 Support, Legacy USB Support

Page 57

3.4.8 USB Configuration

 

BIOS SETUP UTILITY

 

 

Advanced

 

 

 

USB Configuration

 

To enable or disable

 

 

the onboard USB

USB Controller

[Enabled]

controllers.

 

 

USB 2.0 Support

[Enabled]

 

 

Legacy USB Support

[Enabled]

 

 

USB 3.0 Controller

[Enabled]

 

 

 

 

 

Select Screen

 

 

 

Select Item

 

 

+-

Change Option

 

 

F1

General Help

 

 

F9

Load Defaults

 

 

F10

Save and Exit

 

 

ESC

Exit

v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.

USB Controller

Use this item to enable or disable the use of USB controller.

USB 2.0 Support

Use this item to enable or disable the USB 2.0 support.

Legacy USB Support

Use this option to select legacy support for USB devices. There are four configuration options: [Enabled], [Auto], [Disabled] and [BIOS Setup Only]. The default value is [Enabled]. Please refer to below descriptions for the details of these four options:

[Enabled] - Enables support for legacy USB.

[Auto] - Enables legacy support if USB devices are connected. [Disabled] - USB devices are not allowed to use under legacy OS and BIOS setup when [Disabled] is selected. If you have USB compatibility issue, it is recommended to select [Disabled] to enter OS.

[BIOS Setup Only] - USB devices are allowed to use only under BIOS setup and Windows / Linux OS.

USB 3.0 Controller

Use this item to enable or disable the USB 3.0 controller.

5 7

Image 57
Contents 890GMH/USB3 Copyright Notice DisclaimerCALIFORNIA, USA only Contents Software Support Bios Setup UtilityIntroduction Package ContentsCPU SpecificationsLAN Support CD Unique FeatureHardware MonitorPage Page Page DX10.1 Motherboard LayoutI/O Panel LAN Port LED IndicationsTable for Audio Output Connection Pre-installation Precautions InstallationInstallation of CPU Fan and Heatsink CPU InstallationDual Channel Memory Configurations Installation of Memory Modules DimmNotch break Break Installing a DimmInstalling an expansion card Expansion Slots PCI and PCI Express SlotsPcie Slots Dual Monitor Feature Dual Monitor and Surround Display FeaturesFor Windows XP / XP 64-bit OS Surround Display FeatureWhat is HDCP? For Windows 7 / 7 64-bit / VistaTM / VistaTM 64-bit OSHdcp Function Atitm Hybrid CrossFireXTM Operation Guide Enjoy the benefit of Atitm Hybrid CrossFireXTMWhat does an Atitm Hybrid CrossFireXTM system include? View CrossFire TM Enable CrossFire TM PS2USBPW1 Jumpers SetupIDE1 Onboard Headers and ConnectorsInfrared Module Header Supply to this connector CPU Fan ConnectorATX 12V Power Connector Please connect an ATX Western Digital Sataii Hard Disk Setup GuideSamsung HitachiPage What is Hot Plug Function? What is Hot Swap Function?Hot Plug and Hot Swap Functions for Sata / Sataii HDDs Points of attention, before you process the Hot Plug Sata / Sataii HDD Hot Plug Feature and Operation GuideHow to Hot Unplug a Sata / Sataii HDD How to Hot Plug a Sata / Sataii HDDInstalling Windows XP / XP 64-bit With RAID Functions Driver Installation GuideSet up Bios Make a Sata / Sataii Driver DisketteUse RAID Installation Guide to set RAID configuration Installing Windows XP / XP 64-bit Without RAID Functions Install Windows XP / XP 64-bit OS on your system Untied Overclocking Technology Bios Menu Bar Navigation Keys Main ScreenESC OC Tweaker Screen Boot Failure Guard Count Boot Failure GuardSpread Spectrum Advanced Clock CalibrationCPU Frequency Multiplier Memory Configuration Memory ClockCPU Voltage NB Frequency MultiplierTRP TrcdTras TrtpTwtr TrrdTWR TRCCHA CS/ODT Delay CHA ADDR/CMD SetupCHA CS/ODT Setup CHB ADDR/CMD DelayCHB CKE Drive CHA Processor ODTCHB CS/ODT Drive CHB ADDR/CMD DriveWould you like to save current setting user defaults? Chipset Settings Onboard GPU Clock OverrideOnboard GPU Clock MGPU VoltageCPU Configuration Advanced ScreenASRock Instant Flash Cool ‘n’ Quiet CPU ConfigurationSecure Virtual Machine Enhance Halt StateChipset Configuration Acpi Configuration Sata Operation Mode Storage ConfigurationIDE Device Configuration Onboard Sata Controller EnabledType Floppy Configuration PCIPnP ConfigurationPCI Latency Timer PCI IDE BusMasterOnBoard Floppy Controller Super IO ConfigurationSerial Port Address Infrared Port AddressUSB Controller USB ConfigurationUSB 2.0 Support Legacy USB SupportHardware Health Event Monitoring Screen Target CPU TemperatureCPU Quiet Fan Target Fan SpeedBoot Screen Full Screen LogoAddOn ROM Display Boot From Onboard LAN Boot LogoBoot Up Num-Lock Change Supervisor PasswordExit Screen Support CD Information Install Operating SystemRunning The Support CD Drivers Menu