Memory Timing
|
| BIOS SETUP UTILITY |
|
| |
OC Tweaker |
|
|
| ||
Memory Timing |
|
|
|
| |
Power Down Enable |
| [Disabled] |
|
| |
Bank Interleaving |
| [Auto] |
|
| |
Channel Interleaving |
| [HASH 2] |
|
| |
CAS Latency (CL) | 9 | [Auto] |
|
| |
TRCD | 12 | [Auto] |
|
| |
TRP | 12 | [Auto] |
|
| |
TRAS | 30 | [Auto] |
|
| |
TRTP | 5 | [Auto] |
| Select Screen | |
TRRD | 4 | [Auto] |
| ||
| Select Item | ||||
TWTR | 5 | [Auto] |
| ||
+- | Change Option | ||||
TWR | 10 | [Auto] | |||
F1 | General Help | ||||
TRC | 33 | [Auto] | |||
F9 | Load Defaults | ||||
TRWTWB | 8 | [Auto] | |||
F10 | Save and Exit | ||||
TRWTTO | 7 | [Auto] | |||
ESC | Exit | ||||
TWRRD | 2 | [Auto] | |||
|
| ||||
v02.54 (C) Copyright |
Power Down Enable
Use this item to enable or disable DDR power down mode.
Bank Interleaving
Interleaving allows memory accesses to be spread out over banks on the same node, or accross nodes, decreasing access contention.
Channel Interleaving
It allows you to enable Channel Memory Interleaving. Configuration options: [Disabled], [Address bits 6], [Address bits 12], [HASH 1] and [HASH 2]. The default value is [HASH 2].
CAS Latency (CL)
Use this item to adjust the means of memory accessing. Configuration options: [Auto], [4CLK] to [12CLK]. The default value is [Auto].
TRCD
Use this to adjust TRCD values. Configuration options: [Auto], [5CLK] to [12CLK]. The default value is [Auto].
TRP
Use this to adjust TRP values. Configuration options: [Auto], [5CLK] to [12CLK]. The default value is [Auto].
TRAS
Use this to adjust TRAS values. Configuration options: [Auto], [15CLK] to [30CLK]. The default value is [Auto].
TRTP
Use this to adjust TRTP values. Configuration options: [Auto], [4CLK] to [7CLK]. The default value is [Auto].
4 4