ASRock 890GMH/USB3 Spread Spectrum, Boot Failure Guard Count, Advanced Clock Calibration

Spread Spectrum

This item should always be [Auto] for better system stability.

Boot Failure Guard

Enable or disable the feature of Boot Failure Guard.

Boot Failure Guard Count

Enable or disable the feature of Boot Failure Guard Count.

Advanced Clock Calibration

This allows you to adjust Advanced Clock Calibration feature. The default value is [Disabled]. Configuration options: [Disabled], [Auto], [All Cores] and [Per Core]. If you select [All Cores], you will see the option “Value (All Cores)”. Configuration options: [+12%] to [-12%]. If you select [Per Core], you will see the options “Value (Core 0)”, “Value (Core 1)”, “Value (Core 2)

”and “Value (Core 3)”. Configuration options: [+12%] to [-12%].

CPU Active Core Control

This allows you to adjust CPU Active Core Control feature. The configura- tion options depend on the CPU core you adopt. The default value is [All Cores].

Processor Maximum Frequency

It will display Processor Maximum Frequency for reference.

North Bridge Maximum Frequency

It will display North Bridge Maximum Frequency for reference.

Processor Maximum Voltage

It will display Processor Maximum Voltage for reference.

Multiplier/Voltage Change

This item is set to [Auto] by default. If it is set to [Manual], you may adjust the value of Processor Frequency and Processor Voltage. However, it is recommended to keep the default value for system stability.

BIOS SETUP UTILITY

Main OC Tweaker Advanced H/W Monitor Boot Security Exit

Load Optimized CPU OC Setting	[Press Enter]
Load Optimized mGPU OC Setting	[Press Enter]
CPU Configuration
Overclock Mode	[Auto]
CPU Frequency (MHZ)	[200]
CPU DOC Frequency (MHZ)	[Auto]
PCIE Frequency (MHz)	[100]
Spread Spectrum	[Auto]
	[Enabled]
Boot Failure Guard
Boot Failure Guard Count	[3]
Advanced Clock Calibration	[Disabled]
CPU Active Core Control	[All Cores]
Processor Maximum Frequency	x10.5 2100 MHZ
North Bridge Maximum Frequency	x9.0 1800 MHZ
Processor Maximum Voltage	1.2500 V
Multiplier/Voltage Change	[Manual]

If Manual, multiplier and voltage will be set based on user selection. Final result is depending on CPU’s capability. And Cool ‘n’ Quiet will be disabled.

	Select Screen
	Select Item
Enter	Go to Sub Screen
F1	General Help
F9	Load Defaults
F10	Save and Exit
ESC	Exit

v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.

4 2