Baumatic BT2760SS manual Gas connection, Important On completion carry out a gas tightness test

Page 30

Gas connection

ALL INSTALLATION AND SERVICE WORK MUST BE CARRIED OUT BY A CORGI REGISTERED ENGINEER.

oPrior to installation, ensure that the gas supply conditions (nature of the gas and gas pressure) and the adjustment conditions are compatible. The adjustment conditions for this appliance are stated on the rating plate which can be found on the back cover.

oThis appliance is not designed to be connected to a combustion product evacuation device. Particular attention should be given to the relevant requirements regarding ventilation.

oConnection to the cooker should be made with an approved appliance flexible connection to BS 669.

oIf the cooker has been converted for use with LPG, then it should be connected to the gas supply using a bayonet type hose. The hose MUST be suitable for use with LPG gas. They are identifiable by a red band or stripe.

oA hose length of 0.9m to 1.25m is recommended. The length of hose chosen should be such that when the cooker is in situ, the hose does not touch the floor.

oCare should be taken to ensure that the temperature rise of areas at the rear of the cooker that are likely to come in contact with the flexible hose do not exceed 70°C.

oGas pressure may be checked on a semi-rapid hob burner. Remove the appropriate injector and attach a test nipple. Light the other burners and observe that the gas pressure complies with the gas standards in force.

oThis cooker can be connected to the supply both on the right and left hand side at the rear of the cooker. To reverse the position, remove the blanking plug and refit it to the opposite side to where the hose is being connected.

oIMPORTANT: On completion carry out a gas tightness test.

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents BT2760SS 90cm Multi Function twin cavity Cooking theatre BT2760SS Contents Environmental note Important safety information General InformationChild Safety General SafetyDo not Leave the Appliance Unattended Whilst in USE Page Cleaning Declaration of conformitySpecifications Product dimensionsProduct specifications Burner gas hob Standard accessories Optional extrasModel Number ……………………………… Serial Number Date of Purchase Oven function selector knob main oven Oven programmer/timerControl Panel Thermostat control knob main oven Oven function and thermostat control knob secondary ovenSetting and using the oven programmer/timer Oven programmer/timer displaySetting the time of day Setting the minute minder function main and secondary oven ButtonsSetting the duration function main oven only Setting the end cook function main oven only Setting the start and end time function main oven only Will appear on the timer displaySelecting a cooking function and temperature Before first usePage Selecting an oven function and temperature secondary oven Oven operating lightCooking guidelines Using the hob top Automatic electric ignitionEnergy saving tips Cleaning and maintenance Cleaning the hob burners Removing the oven door for cleaning Removing the inner door glass for cleaningInstallation Page Ventilation requirements Gas Safety Installation and Use Regulations Gas connection Important On completion carry out a gas tightness testPage Page Chain should be kept as short as is practical Green and Yellow Earth Blue Switch the appliance off at the control switch Replacing the mains supply cableMy appliance isn’t working correctly Oven light is not working Am getting condensation in my ovenPage Headquarters Mail
Top Page Image Contents