Baumatic BT2760SS manual Green and Yellow Earth Blue

Page 34

Electrical connection

This appliance must be installed by a qualified person in accordance with the latest edition of the I.E.E. Regulations and in compliance with Baumatic’s instructions.

Before connecting the appliance, make sure that the supply voltage marked on the rating plate corresponds with your mains supply voltage.

WARNING: THIS APPLIANCE MUST BE EARTHED.

oThis appliance must be wired into a 20 A double pole switched fused spur outlet, having 3 mm contact separation and placed in an easily accessible position adjacent to the appliance. It should not be located above the appliance and no more than 1.25m away from it.

oThe spur outlet must still be accessible even when your oven is located in its operating position.

oCable type: H05 RRF 3 core x 2.5 mm²

Connecting the mains supply cable

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code:

GREEN AND YELLOW

EARTH

BLUE

NEUTRAL

BROWN

LIVE

oOpen the mains terminal block cover as shown, unscrew the cable clamp (A) and unscrew (not fully) the screws in the mains terminal block (L, N, E) which secure the three wires of the mains cable.

oFit the cable and refit the cable clamp (A).

oAllow sufficient cable length for the cooker to be pulled out for cleaning, but do not let it hang closer than 50mm to the floor.

34

Image 34
Contents BT2760SS 90cm Multi Function twin cavity Cooking theatre BT2760SS Contents Environmental note Important safety information General InformationGeneral Safety Child SafetyDo not Leave the Appliance Unattended Whilst in USE Page Cleaning Declaration of conformityProduct dimensions SpecificationsProduct specifications Burner gas hob Optional extras Standard accessoriesModel Number ……………………………… Serial Number Date of Purchase Oven function selector knob main oven Oven programmer/timerControl Panel Thermostat control knob main oven Oven function and thermostat control knob secondary ovenOven programmer/timer display Setting and using the oven programmer/timerSetting the time of day Setting the minute minder function main and secondary oven ButtonsSetting the duration function main oven only Setting the end cook function main oven only Setting the start and end time function main oven only Will appear on the timer displaySelecting a cooking function and temperature Before first usePage Selecting an oven function and temperature secondary oven Oven operating lightCooking guidelines Using the hob top Automatic electric ignitionEnergy saving tips Cleaning and maintenance Cleaning the hob burners Removing the oven door for cleaning Removing the inner door glass for cleaningInstallation Page Ventilation requirements Gas Safety Installation and Use Regulations Gas connection Important On completion carry out a gas tightness testPage Page Chain should be kept as short as is practical Green and Yellow Earth Blue Switch the appliance off at the control switch Replacing the mains supply cableMy appliance isn’t working correctly Oven light is not working Am getting condensation in my ovenPage Headquarters Mail