ASRock 2Core1066-2.13G manual CPU Configuration

BIOS SETUP UTILITY

Main Advanced H/W Monitor Boot Security Exit

Advanced Settings

WARNING : Setting wrong values in below sections may cause system to malfunction.

CPU Configuration

Chipset Configuration

ACPI Configuration

IDE Configuration

PCIPnP Configuration

Floppy Configuration

SuperIO Configuration

USB Configuration

Configure CPU

	Select Screen
	Select Item
Enter	Go to Sub Screen
F1	General Help
F9	Load Defaults
F10	Save and Exit
ESC	Exit

v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.

Setting wrong values in this section may cause the system to malfunction.

3.3.1 CPU Configuration

BIOS SETUP UTILITY
Advanced
CPU Configuration		Select the over clock
Overclock Mode		mode.
	[Auto]
CPU Frequency (MHz)	[266]
PCIE Frequency (MHz)	[100]
Boot Failure Guard	[Enabled]
Spread Spectrum	[Auto]
Ratio Actual Value	8
Enhance Halt State	[Disabled]		Select Screen
Max CPUID Value Limit	[Disabled]
CPU Thermal Throttling	[Enabled]		Select Item
		+-	Change Option
No-Excute Memory Protection	[Disabled]
		F1	General Help
Intel (R) SpeedStep(tm) tech.	[Auto]
		F9	Load Defaults
		F10	Save and Exit
		ESC	Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.

Overclock Mode

Use this to select Overclock Mode. The default value is [Auto]. Configura- tion options: [Auto], [CPU, PCIE, Sync.] and [CPU, PCIE, Async.].

CPU Frequency (MHz)

Use this option to adjust CPU frequency.

PCIE Frequency (MHz)

Use this option to adjust PCIE frequency.

Boot Failure Guard

Enable or disable the feature of Boot Failure Guard.

Spread Spectrum

This item should always be [Auto] for better system stability.

2 7