ASRock 2Core1066-2.13G manual Chipset Configuration

3.3.2 Chipset Configuration

BIOS SETUP UTILITY

Advanced
Chipset Configuration			Options
DRAM Frequency	[Auto]	Auto
Flexibility Option	[Disabled]
		200MHz		(DDRII400)
Configure DRAM Timing by SPD [Enabled]
		266MHz		(DDRII533)
DRAM CAS# Latency	[Auto]
		333MHz		(DDRII667)
Primary Graphics Adapter	[PCI]
Internal Graphics Mode Select	[Auto]
DVMT Mode Select	[DVMT Mode]
DVMT/FIXED Memory	[Maximum DVMT]		Select Screen
OnBoard HD Audio	[Auto]		Select Item
Front Panel	[Auto]	+ -	Change Option
CD-In	[Enabled]	F1	General Help
OnBoard Lan	[Enabled]	F9	Load Defaults
PCI Fix Function	[Enabled]	F10	Save and Exit
		ESC	Exit
VCCM Voltage	[Auto]

v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.

DRAM Frequency

If [Auto] is selected, the motherboard will detect the memory module(s) inserted and assigns appropriate frequency automatically. You may also select other value as operating frequency: [200MHz (DDRII 400)], [266MHz (DDRII 533)], [333MHz (DDRII 667)]. The configuration options may change according to the corresponding FSB frequency of the CPU you adopt.

Flexibility Option

The default value of this option is [Disabled]. It will allow better tolerance for memory compatibility when it is set to [Enabled].

Configure DRAM Timing by SPD

Select [Enabled] will configure the following items by the contents in the SPD (Serial Presence Detect) device. If you select [Disabled], you will find the items “DRAM RAS# to CAS# Delay”, “DRAM RAS# Precharge”, and “DRAM RAS# Activate to Precharge” appear to allow you adjusting them.

DRAM CAS# Latency

Use this item to adjust the means of memory accessing. Configuration options: [2 DRAM Clocks], [3 DRAM Clocks], [4 DRAM Clocks], [5 DRAM Clocks], and [6 DRAM Clocks].

DRAM RAS# to CAS# Delay

This controls the latency between the DRAM active command and the read / write command. Configuration options: [2 DRAM Clocks], [3 DRAM Clocks], [4 DRAM Clocks], [5 DRAM Clocks], and [6 DRAM Clocks].

2 9