Baumatic BHC605 manual Switching off the hob, Residual heat indicator, Locking the hob top

Page 12

Switching off the hob

oOnce you have switched off all of the cooking zones, you should turn off the hob.

oPress the ON/OFF button (9).

oIt is possible to turn the hob off at any time by pressing the ON/OFF button (9).

oThe hob will switch off automatically after 2 minutes, if none of the zones are in use.

Residual heat indicator

o After a zone is switched off, the corresponding cooking zone indicator (3) will show a flashing letter “H”. This means that the zone has not been switched off for more than 35 minutes since last use. Therefore it is more likely that the temperature of the zone is still hot enough to cause injury.

oAfter 35 minutes from the zone being switched off the letter “H” will go out.

oIMPORTANT: The residual heat indicator will disappear if the mains supply to the product is cut.

oIT IS STILL POSSIBLE TO BURN YOURSELF ON A HOB ZONE, EVEN WHEN THE TEMPERATURE OF IT HAS DROPPED BELOW 60°C.

Locking the hob top

oThe whole hob top can be locked by pressing the safety lock button (1) whilst the appliance is switched on.

oThe timer display (6) will show “L0” to indicate that the safety lock feature has been activated.

12

Image 12
Contents BHC605 60cm touch control Ceramic hob BHC605 Contents Environmental note Important safety information General InformationChild Safety General SafetyDuring use Cleaning Declaration of conformityTo avoid damaging your appliance Specifications Product dimensions Aperture dimensionsProduct specifications Standard accessoriesPage Using the ceramic hob Control panel layoutBefore first use Touch controlsSwitching the hob top on Switching on a zone and setting a power levelSwitching off a zone Switching off the hob Residual heat indicatorLocking the hob top Hob timer Timer can only be assigned to one cooking zone at a timeSetting a countdown time Safety cut-off Time Limit hoursHob guidelines Cleaning and maintenance Cleaning the ceramic hob topCleaning table After each useUsing a ceramic hob scraper Using a specialist ceramic hob cleanerInstallation IEE Wiring Regulations Electricity At Work RegulationsPositioning Unpacking the applianceInstalling the appliance Page Connecting the mains supply cable Electrical connectionPage Switch the appliance off at the control switch Replacing the mains supply cableCooking zones are not functioning or will not switch on Humming sound is heard when a cooking zone is selectedMy appliance isn’t working correctly Cooking zones have become discolouredDo not Attempt to Repair the Appliance Yourself Baumatic Consumables Sales Telephone Slovakia
Related manuals
Manual 1 pages 27.28 Kb