oCarefully turn the hob upside down and place it on a cushioned mat.
oIMPORTANT: Do not use a silicon sealant to seal the appliance against the aperture. This will make it difficult to remove the hob from the aperture in future, particularly if it needs to be serviced.
oCarefully turn the hob back over and then gently lower it into the aperture hole that you have cut out.
oThere are holes on the base or the sides of the hob that you can fix the four brackets to. There are three holes in each one of the brackets.
o You should place the
bracket on the underneath of the hob, in a position that is appropriate for the aperture that you have cut out. Using the screws provided, fix the bracket to the hob. These screws MUST be securely tightened.
20