Baumatic BHC605 manual My appliance isn’t working correctly, Cooking zones have become discoloured

Page 24

My appliance isn’t working correctly

oThe cooking zones are not functioning or will not switch on.

*It has been more than 2 minutes since the appliance was switched on. You should switch the appliance back on again, using the ON/OFF button and then switch on a cooking zone.

*The safety lock has been switched on (see the “Locking the hob top” section for information on how to turn off the safety lock).

*Several cooking zone selection buttons have been pressed at once. You should only try to switch on one cooking zone at once.

*The safety cut out has been triggered. Press the ON/OFF button to reset the hob.

*Check that the mains electrical supply to the appliance is correct and working. Check the mains fuse.

oThe residual heat indicator has not come on after I have switched a cooking zone off.

*The cooking zone has only been turned on for a short period of time; therefore it did not go above 60°C.

*IMPORTANT: If the cooking zone does appear to be hotter than 60°C and the residual heat indicator has not come on, you should call the Customer Care Department.

o A humming sound is heard when a cooking zone is selected.

*This is normal; the sound will disappear when the zone heats up.

oThe cooking zones have become discoloured.

*This maybe caused by burnt on remnants of food. This will not affect the working of the appliance. However you should make sure that the cleaning instructions are being followed regularly.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents BHC605 60cm touch control Ceramic hob BHC605 Contents Environmental note Important safety information General InformationChild Safety General SafetyDuring use Cleaning Declaration of conformityTo avoid damaging your appliance Specifications Product dimensions Aperture dimensionsProduct specifications Standard accessoriesPage Using the ceramic hob Control panel layoutBefore first use Touch controlsSwitching the hob top on Switching on a zone and setting a power levelSwitching off a zone Switching off the hob Residual heat indicatorLocking the hob top Hob timer Timer can only be assigned to one cooking zone at a timeSetting a countdown time Safety cut-off Time Limit hoursHob guidelines Cleaning and maintenance Cleaning the ceramic hob topCleaning table After each useUsing a ceramic hob scraper Using a specialist ceramic hob cleanerInstallation IEE Wiring Regulations Electricity At Work RegulationsPositioning Unpacking the applianceInstalling the appliance Page Connecting the mains supply cable Electrical connectionPage Switch the appliance off at the control switch Replacing the mains supply cableCooking zones are not functioning or will not switch on Humming sound is heard when a cooking zone is selectedMy appliance isn’t working correctly Cooking zones have become discolouredDo not Attempt to Repair the Appliance Yourself Baumatic Consumables Sales Telephone Slovakia
Related manuals
Manual 1 pages 27.28 Kb
Top Page Image Contents