Replacing the mains supply cable
If the mains supply cable is damaged, then it must be replaced by an appropriate replacement.
The mains supply cable should be replaced in accordance with the following instructions:
oSwitch the appliance off at the control switch.
oOpen the terminal block on the underside of the hob.
oUnscrew the terminal screws fixing the cable.
oReplace the cable with one of the same length and in accordance with the specification given on page 21.
oThe
oThe “blue” neutral wire must be connected to the terminal marked with letter (N) - the live wire must be connected to the terminal marked with letter (L).
23