Baumatic BHC605 manual Electrical connection, Connecting the mains supply cable

Page 21

Electrical connection

This appliance must be installed by a qualified person in accordance with the latest edition of the I.E.E. Regulations and in compliance with Baumatic’s instructions.

Before connecting the appliance, make sure that the supply voltage marked on the rating plate corresponds with your mains supply voltage.

WARNING: THIS APPLIANCE MUST BE EARTHED.

oThis appliance must be wired into a 30 A double pole switched fused spur outlet, having 3 mm contact separation and placed in an easily accessible position adjacent to the appliance. It should not be located above the appliance and no more than 1.25m away from it.

oThe spur outlet must still be accessible even when your hob is located in its operating position.

oCable type: H05 RRF 3 core x 4 mm²

Connecting the mains supply cable

oThe mains terminal block is located on the underside of the hob and the terminals are accessible by removing the terminal block cover by removing the cover screw.

21

Image 21
Contents BHC605 60cm touch control Ceramic hob BHC605 Contents Environmental note General Information Important safety informationChild Safety General SafetyDuring use Cleaning Declaration of conformityTo avoid damaging your appliance Product dimensions Aperture dimensions SpecificationsProduct specifications Standard accessoriesPage Control panel layout Using the ceramic hobBefore first use Touch controlsSwitching the hob top on Switching on a zone and setting a power levelSwitching off a zone Switching off the hob Residual heat indicatorLocking the hob top Hob timer Timer can only be assigned to one cooking zone at a timeSetting a countdown time Time Limit hours Safety cut-offHob guidelines Cleaning the ceramic hob top Cleaning and maintenanceCleaning table After each useUsing a specialist ceramic hob cleaner Using a ceramic hob scraperIEE Wiring Regulations Electricity At Work Regulations InstallationPositioning Unpacking the applianceInstalling the appliance Page Electrical connection Connecting the mains supply cablePage Replacing the mains supply cable Switch the appliance off at the control switchHumming sound is heard when a cooking zone is selected Cooking zones are not functioning or will not switch onMy appliance isn’t working correctly Cooking zones have become discolouredDo not Attempt to Repair the Appliance Yourself Baumatic Consumables Sales Telephone Slovakia
Related manuals
Manual 1 pages 27.28 Kb