Programming your telephone
•Locking the keypad
FCN | Key Lock | OK |
|
•Lock the keypad automatically
You can configure your set so that the keypad is blocked automatically after 5, 10 or 20 seconds.
6.13 Activate/deactivate the Warning tones
The warning tones inform the user of an abnormal operation (out of range, system activated or halted, etc.). To deactivate these tones:
FCN | Warning tones | OK |
|
FCN
OK
select the time period before the automatic locking
|
|
| OK | |
|
|
| ||
Enable tones | OR | Desable tones | ||
| ||||
|
|
|
| |
|
|
|
|
•Unlocking the keypad
#
6.11 Configure the set according to the background noise (Noise mode)
This function is used to configure the set to obtain optimal listening conditions depending on the background noise.
FCN | Noise mode | OK |
|
•Normal: corresponds to most office environments.
•High: corresponds to an average level of background noise.
•Severe: corresponds to an extremely high level of background noise.
6.12 Activate/deactivate the Key tones
By default the set emits a tone each time a key is pressed.
To deactivate these tones:
FCN | Key tones | OK |
|
|
| ||
Enable tones | OR Desable tones | OK | |
|
21 |