ASRock IMB-110 Series manual Advanced Screen, Instant Flash

Page 31

3.3 Advanced Screen

In this section, you may set the configurations for the following items: CPU Configu- ration, Chipset Configuration, Storage Configuration, Super IO Configuration, ACPI Configuration and USB Configuration.

Setting wrong values in this section may cause the system to malfunction.

Instant Flash

Instant Flash is a UEFI flash utility embedded in Flash ROM. This conve- nient UEFI update tool allows you to update system UEFI without entering operating systems first like MS-DOS or Windows®. Just launch this tool and save the new UEFI file to your USB flash drive, floppy disk or hard drive, then you can update your UEFI only in a few clicks without prepar- ing an additional floppy diskette or other complicated flash utility. Please be noted that the USB flash drive or hard drive must use FAT32/16/12 file system. If you execute Instant Flash utility, the utility will show the UEFI files and their respective information. Select the proper UEFI file to update your UEFI, and reboot your system after UEFI update process completes.

31

Image 31
Contents IMB-110 Disclaimer Copyright NoticeContents Uefi Setup Utility Introduction Package ContentsSpecifications Support CD ConnectorsBios Feature Unique FeaturePage IMB Motherboard LayoutLAN Port LED Indications I/O PanelScrew Holes Pre-installation PrecautionsInstalling a SO-DIMM Installation of Memory Modules SO-DIMMExpansion Slot PCI Slot Installing an expansion cardDual Monitor Feature RI# Jumpers SetupBacklight Power Jumper +5V Onboard Headers and Connectors Front Panel Audio Header This is an interface for front 3W Audio AMP Output Pin Power Connector Please connect a DC Sata Power Connectors +5V Serial ATA3 SATA3 Hard Disks Installation Serial ATA Sata / Serial ATA2 SATA2 Hard Disks InstallationHot Plug and Hot Swap for SATA3 HDDs What is Hot Plug?What is Hot Swap? Hot Plug for Sata / SATA2 HDDsPoints of attention, before you process Hot Plug Sata / SATA2 / SATA3 HDD Hot Plug Operation GuideHow to Hot Unplug a Sata / SATA2 / SATA3 HDD How to Hot Plug a Sata / SATA2 / SATA3 HDDSet up Uefi Driver Installation GuideUsing Sata / SATA2 / SATA3 HDDs without NCQ Set Up Uefi Installing Windows XP / XP 64-bit Without RAIDInstall Windows XP / XP 64-bit OS on your system Using Sata / SATA2 / SATA3 HDDs with NCQ Set Up Uefi Uefi Menu Bar IntroductionMain Screen Navigation KeysInstant Flash Advanced ScreenIntel Hyper Threading Technology CPU ConfigurationNo-Excute Memory Protection Chipset Configuration Onboard LAN2 Marvell SATA3 Bootable Storage ConfigurationOnboard Sataii Mode Marvell SATA3 Operation ModeSuper IO Configuration Acpi Configuration USB 2.0 Controller USB ConfigurationLegacy USB Support Hardware Health Event Monitoring Screen CPUFAN1 SettingBoot From Onboard LAN Boot ScreenSetup Prompt Timeout Bootup Num-LockSecurity Screen Exit Screen Drivers Menu Install Operating SystemSupport CD Information Running The Support CD
Related manuals
Manual 2 pages 21.07 Kb