ASRock IMB-110 Series manual Acpi Configuration

Page 37

3.3.5 ACPI Configuration

Suspend to RAM

Use this item to select whether to auto-detect or disable the Suspend-to- RAM feature. Select [Auto] will enable this feature if the OS supports it.

PS/2 Keyboard Power On

Use this item to enable or disable PS/2 keyboard to turn on the system from the power-soft-off mode.

PCI Devices Power On

Use this item to enable or disable PCI devices to turn on the system from the power-soft-off mode.

Ring-In Power On

Use this item to enable or disable Ring-In signals to turn on the system from the power-soft-off mode.

RTC Alarm Power On

Use this item to enable or disable RTC (Real Time Clock) to power on the system.

USB Keyboard/Remote Power On

Use this item to enable or disable USB Keyboard/Remote to power on the system.

USB Mouse Power On

Use this item to enable or disable USB Mouse to power on the system.

37

Image 37
Contents IMB-110 Disclaimer Copyright NoticeContents Uefi Setup Utility Introduction Package ContentsSpecifications Bios Feature ConnectorsUnique Feature Support CDPage IMB Motherboard LayoutLAN Port LED Indications I/O PanelScrew Holes Pre-installation PrecautionsInstalling a SO-DIMM Installation of Memory Modules SO-DIMMExpansion Slot PCI Slot Installing an expansion cardDual Monitor Feature RI# Jumpers SetupBacklight Power Jumper +5V Onboard Headers and Connectors Front Panel Audio Header This is an interface for front 3W Audio AMP Output Pin Power Connector Please connect a DC Sata Power Connectors +5V Serial ATA3 SATA3 Hard Disks Installation Serial ATA Sata / Serial ATA2 SATA2 Hard Disks InstallationWhat is Hot Swap? What is Hot Plug?Hot Plug for Sata / SATA2 HDDs Hot Plug and Hot Swap for SATA3 HDDsPoints of attention, before you process Hot Plug Sata / SATA2 / SATA3 HDD Hot Plug Operation GuideHow to Hot Unplug a Sata / SATA2 / SATA3 HDD How to Hot Plug a Sata / SATA2 / SATA3 HDDSet up Uefi Driver Installation GuideUsing Sata / SATA2 / SATA3 HDDs without NCQ Set Up Uefi Installing Windows XP / XP 64-bit Without RAIDInstall Windows XP / XP 64-bit OS on your system Using Sata / SATA2 / SATA3 HDDs with NCQ Set Up Uefi Uefi Menu Bar IntroductionMain Screen Navigation KeysInstant Flash Advanced ScreenIntel Hyper Threading Technology CPU ConfigurationNo-Excute Memory Protection Chipset Configuration Onboard LAN2 Onboard Sataii Mode Storage ConfigurationMarvell SATA3 Operation Mode Marvell SATA3 BootableSuper IO Configuration Acpi Configuration USB 2.0 Controller USB ConfigurationLegacy USB Support Hardware Health Event Monitoring Screen CPUFAN1 SettingSetup Prompt Timeout Boot ScreenBootup Num-Lock Boot From Onboard LANSecurity Screen Exit Screen Support CD Information Install Operating SystemRunning The Support CD Drivers Menu
Related manuals
Manual 2 pages 21.07 Kb