BIOS SETUP UTILITY
Main | Advanced | H/W Monitor | Boot | Security | Exit |
Advanced Settings
WARNING : Setting wrong values in below sections may cause system to malfunction.
CPU Configuration
Chipset Configuration
ACPI Configuration
IDE Configuration
PCIPnP Configuration
Floppy Configuration
SuperIO Configuration
USB Configuration
Configure CPU
| Select Screen |
| Select Item |
Enter | Go to Sub Screen |
F1 | General Help |
F9 | Load Defaults |
F10 | Save and Exit |
ESC | Exit |
v02.54 (C) Copyright
Setting wrong values in this section may cause the system to malfunction.
3.3.1 CPU Configuration
BIOS SETUP UTILITY
Advanced
CPU Configuration
CPU Host Frequency |
| [Auto] |
Actual Frequency (MHz) | [200] | |
Boot Failure Guard |
| [Enabled] |
Spread Spectrum |
| [Auto] |
Ratio Status | Unlocked (Max :17, Min : 14) | |
Ratio Actual Value |
| 17 |
Ratio CMOS Setting |
| [17] |
Enhance Halt State |
| [Disabled] |
Max CPUID Value Limit |
| [Disabled] |
Intel (R) Virtualization tech. | [Enabled] | |
CPU Thermal Throttling | [Enabled] | |
[Disabled] | ||
Hyper Threading Technology | [Enabled] | |
Intel (R) SpeedStep(tm) tech. | [Auto] |
Select how to set the CPU host frequency.
| Select Screen |
| Select Item |
+- | Change Option |
F1 | General Help |
F9 | Load Defaults |
F10 | Save and Exit |
ESC | Exit |
v02.54 (C) Copyright
CPU Host Frequency
While entering setup, BIOS auto detects the present CPU host frequency of this motherboard. The actual CPU host frequency will show in the following item.
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
Spread Spectrum
This item should always be [Auto] for better system stability.
Ratio Status
This is a
2 8