3.3.4 IDE Configuration
| BIOS SETUP UTILITY |
|
|
Advanced |
|
|
|
IDE Configuration |
| Set [Compatible] | |
| when Legacy OS | ||
|
| ||
| [Enhanced] | ||
ATA/IDE Configuration | is used. | ||
SATAII_1 (PORT0) | [Hard Disk] | Set [Enhanced] | |
SATAII_2 (PORT1) | [Not Detected] | when Native OS | |
SATAII_3 (PORT2) | [Not Detected] | (Win2000 / XP) | |
SATAII_4 (PORT3) | [Not Detected] | is used. | |
IDE1 Master | [ATAPI CDROM] |
|
|
IDE1 Slave | [Not Detected] |
|
|
|
|
| Select Screen |
|
|
| Select Item |
|
| +- | Change Option |
|
| F1 | General Help |
|
| F9 | Load Defaults |
|
| F10 | Save and Exit |
|
| ESC | Exit |
v02.54 (C) Copyright | |||
ATA/IDE Configuration
Please select [Compatible] when you install legacy OS (Windows NT). If native OS (Windows 2000 / XP) is installed, please select [Enhanced].
When [Compatible] is selected
Combined Option
It allows you to select between [SATA 1, SATA 2, SATA 3, SATA 4], [SATA 1, SATA 3, IDE 1], and [IDE 1, SATA 2, SATA 4]. If it is set to [SATA 1, SATA 3, IDE 1], then SATAII_2 (PORT1), SATAII_4 (PORT3) will not work. Likewise, if it is set to [IDE 1, SATA 2, SATA 4], then SATAII_1 (PORT0), SATAII_3 (PORT2) will not work.
Because Intel® ICH7 south bridge only supports four IDE devices under legacy OS (Windows NT), you have to choose [SATA 1, SATA 2, SATA 3, SATA 4], [SATA 1, SATA 3, IDE 1], or [IDE 1, SATA 2, SATA 4] when the installed device is used with legacy OS.
| [SATA 1, SATA 2, | [SATA 1, SATA 3, | [IDE 1, SATA 2, |
| SATA 3, SATA 4] | IDE 1] | SATA 4] |
Master | SATAII_1 (PORT0), | SATAII_1 | SATAII_2 |
| SATAII_2 (PORT1) | (PORT0) | (PORT1) |
|
|
|
|
Slave | SATAII_3 (PORT2), | SATAII_3 | SATAII_4 |
| SATAII_4 (PORT3) | (PORT2) | (PORT3) |
|
|
|
|
IDE Device Configuration
You may set the IDE configuration for the device that you specify. We will use the “Primary IDE Master” as the example in the following instruction.
3 3