MSI 760GM manual

MS-7596

▶SATA1~6 & 7/8 & 9/10 & IDE Primary Master/ Slave & E-SATA1/2 Press <Enter> to enter the sub-menu, and the following screen appears.

▶Device / Vendor / Size

It will show the device information that you connected to the SATA connector. ▶LBA/Large Mode

This allows you to enable or disable the LBA Mode. Setting to Auto enables LBA mode if the device supports it and the devices is not already formatted with LBA mode disabled.

▶DMA Mode Select DMA Mode.

▶Hard Disk S.M.A.R.T.

This allows you to activate the S.M.A.R.T. (Self-Monitoring Analysis & Reporting Technology) capability for the hard disks. S.M.A.R.T is a utility that monitors your disk status to predict hard disk failure. This gives you an opportunity to move data from a hard disk that is going to fail to a safe place before the hard disk becomes offline.

Important

IDE Primary Master/ Slave, SATA 1~5 & E-SATA are appearing when you connect the HD devices to the IDE/ SATA/ E-SATA connectors on the mainboard.

▶Floppy Drive A

This item allows you to set the type of floppy drives installed.

3-7