MSI 760GM manual Spp

MS-7596

▶PCI IDE BusMaster

This item allows you to enable/ disable BIOS to used PCI busmastering for reading/ writing to IDE drives.

▶OnChip SATA Controller

This item allows users to enable or disable the SATA controller.

▶RAID Mode

This item is used to select mode for SATA connectors.

▶I/O Devices

Press <Enter> to enter the sub-menu and the following screen appears:

▶COM Port 1

Select an address and corresponding interrupt for the serial port.

▶Parallel Port

There is a built-in parallel port on the on-board Super I/O chipset that provides Stan- dard, ECP, and EPP features. It has the following options:

[Disabled]
[3BC/IRQ7]	Line Printer port 0
[278/IRQ5]	Line Printer port 2
[378/IRQ7]	Line Printer port 1
▶Parallel Port Mode
[SPP]	Standard Parallel Port
[EPP]	Enhanced Parallel Port
[ECP]	Extended Capability Port
[ECP + EPP]	Extended Capability Port + Enhanced Parallel Port

[Bi-Directional]

To operate the onboard parallel port as Standard Parallel Port only, choose [SPP]. To operate the onboard parallel port in the EPP mode simultaneously, choose [EPP]. By choosing [ECP], the onboard parallel port will operate in ECP mode only. Choos- ing [ECP + EPP] will allow the onboard parallel port to support both the ECP and EPP modes simultaneously.

3-13