MSI 760GM manual Computer is turned off

MS-7596

▶Power Button Function

This feature sets the function of the power button. Settings are:

[Power Off]	The power button functions as normal power off button.
[Suspend]	When you press the power button, the computer enters suspend/
	sleep mode, but if the button is pressed for more than four seconds,
	the computer is turned off.

▶Restore On AC Power Loss

This item specifies whether your system will reboot after a power failure or interrupt occurs. Settings are:

[Off]	Always leaves the computer in the power off state.
[On]	Always leaves the computer in the power on state.
[Last State]	Restore the system to the status before power failure or interrupt
	occurred.

▶Wake Up Event Setup

Press <Enter> and the following sub-menu appears.

▶Wake Up Event By

Setting to [BIOS] activates the following fields, and use the following fields to set the wake up events. Setting to [OS], the wake up events will be defined by OS.

▶Resume From S3 By USB Device

The item allows the activity of the USB device to wake up the system from S3 (Sus- pend to RAM) sleep state.

▶Resume From S3 By PS/2 Keyboard / Mouse

These items determine whether the system will be awakened from what power sav- ing modes when input signal of the PS/2 keyboard/ mouse is detected.

▶Resume By PCI Device (PME#)

When set to [Enabled], the feature allows your system to be awakened from the power saving modes through any event on PME (Power Management Event).

▶Resume By PCI-E Device

When set to [Enabled], the feature allows your system to be awakened from the power saving modes through any event on PCIE device.

▶Resume By RTC Alarm

The field is used to enable or disable the feature of booting up the system on a scheduled time/date.

3-15