Creating Virtual
Disks
This topic describes the procedure for creating virtual disks by using the Marvell BIOS setup utility.
1.In the Topology pane, scroll to [HBA 0: Marvell 0] and press Enter. A menu
Marvell BIOS Setup (c) xxxx Marvell Technology Group Ltd.
Topology | Information |
|
| |||||||
HBA 0: Marvell 0 |
|
| Vendor ID |
|
| : | 1848 | |||
|
|
|
|
|
| |||||
Virtual Disks |
| [Configuration Wizard] |
|
|
|
|
| : | 91xx | |
Free physical | Disks[Int13: Enable] | Revision ID |
|
|
|
| : | 81 | ||
PD 0: ST3750330MS | BIOS Version |
|
|
| : | 1.0.0.1008 | ||||
|
| |||||||||
PD 8: ST3750330MS | Firmware Version | : | 2.1.0.1316 | |||||||
|
|
|
|
|
|
|
|
| : | 5.0Gbps |
|
|
| PCIe Speed Rate | |||||||
|
|
| Configure SATA as : | AHCI Mode | ||||||
Help
Select free disks to create array and continue to create virtual disk on this array.
ENTER: Operation F10: Exit/ Save ESC: Return
2.Press Space to select the disk, use the arrow keys to scroll the list of free disks. After select the required disks as shown below, press Enter to continue.
Marvell BIOS Setup (c) xxxx Marvell Technology Group Ltd.
Configure
Appendix C
HBA 0: Marvell 0
Virtual Disks
Free physical Disks
*PD 0: ST3750330MS
*
PD 8: ST3750330MS
Help
Port ID | : | 1 |
PD ID | : | 8 |
Type | : | SATA PD |
Status | : | Unconfigured |
Size | : | 953869MB |
Feature Support | : | NCQ 6G 48Bits |
Current Speed | : | 6G |
Model | : | ST37503330MS |
Serial | : |
|
FW Version | : | 05.01D05 |
Select free disks to create array and continue to create virtual disk on this array.
ENTER: Operation F10: Exit/ Save ESC: Return