BIOS Setup
▶Intel
This item is used to enable/disable the Intel Virtualization Technology for Directed I/O
▶Active Processor Cores
This item allows you to select the number of active processor cores.
▶Intel
EIST
The Enhanced Intel SpeedStep technology allows you to set the performance level of the microprocessor whether the computer is running on battery or AC power. This field will appear after you installed the CPU which supports speedstep technology.
▶C1E
Support
To enable this item to read the CPU power consumption while idle. Not all processors support Enhanced Halt state (C1E).
▶Intel
Turbo Boost
This item will appear when you install a CPU with Intel Turbo Boost technology. This item is used to enable/ disable Intel Turbo Boost technology. It can scale processor frequency higher dynamically when applications demand more performance and TDP headroom exists. It also can deliver seamless power scalability (Dynamically scale up,
▶Adjust CPU Base Frequency (MHz)
This item allows you to set the CPU Base clock (in MHz). You may overclock the CPU by adjusting this value. Please note the overclocking behavior is not guaranteed.
▶OC Stepping
This item will be enabled after you set the overclocking frequency in the “Base Clock (MHz)”. And the following items will appear. This items will help the system to overclock step by step after system booting up.
▶Start OC Stepping From (MHz)
This item is used to set the initial base clock. The system will boot with the initial base clock, and start to overclock from initial base clock to set base clock that you set in “Base Clock (MHz)” step by step.
▶OC Step
This item is used to set how many steps for base colck overclocking. ▶OC Step Count Timer
This item is used to set the buffer time for every step. ▶Adjust CPU Ratio
This item allows you to adjust the CPU ratio.
▶Adjusted CPU Frequency (MHz)
It shows the adjusted CPU frequency (Base clock x Ratio).
▶OC Genie Button Operation
This item is used to enable/ disable the OC Genie button function. ▶Base Clock Button
This item is used to enable/ disable the base clock button function.