MSI MS-9297 manual Precautions

Page 4

Preface

Precautions

1)Access can only be gained by service persons or by users who have been trained on the restrictions and the precautions for this specific site.

2)Access is by means of at least one of the following, special tool, lock and key, or other means of security, and is controlled by the authority responsible for the location.

3)Rack Mount Installation Instructions:

Elevated Operating Ambient - If installed in a closed or multi-unit rack as- sembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the maxi- mum ambient temperature (Tma) specified by the manufacturer.

Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the equipment is not compromised.

Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechani- cal loading.

Circuit Overloading - Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of the circuits might have on overcurrent protection and supply wiring. Appropri- ate consideration of equipment nameplate ratings should be used when addressing this concern.

Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given to supply connec- tions other than direct connections to the branch circuit (e.g. use of power strips).

iv

Image 4
Contents MS-9297 Revision History Safety Instructions Precautions FCC-A Radio Frequency Interference Statement Weee Statement Español Türkçe Table of Contents Page Overview  Top View System OverviewNMI Switch USB Port Power LED Front View Front Bezel LEDs Color State Description Rear View Rear Bezel LEDs Input/Output Port, Switch, LED ProcessorSupported QPI ChipsetPower Supply ChassisSystem Assembly  Necessary Tools Getting StartedSystem Assembly  System Cover CPU Page Page Page  Memory Page Memory Population Rules DIMMs PCI Expansion Card Page  Hard Disk Drive Page  Rack Rails System MountingPage  Rack Mounting Page Mainboard Setup Mainboard Setup Quick Components GuideIntroduction to LGA 1366 CPU CPU Installation Introduction to LGA 1366 CPU CPU Central Processing UnitCPU Installation Page Memory Population Rules MemoryPopulation Rules Installing Memory Modules USB Port System ID LED System ID Switch NMI Switch Mainboard Setup Rear Panel I/OSub VGA Port 10 PS/2 Keyboard PortSerial Attached Scsi Connector MINISAS1 Serial ATA II Connector SATA1, SATA2Connector Ipmb Connector JIPMB1 Serial Port Connector COM1Front USB Connector JUSB1, JUSB3, JUSB4, JUSB5 Bios Recovery Jumper JRECOVERY1 Normal or Clear Clear Data By BMC defaultNormal default Clear Cmos Jumper JCLRCMOS1Bios Password Jumper JPASSWORD1 RAID Select Jumper JRAIDSEL1PCI Peripheral Component Interconnect Express Slot SlotBios Setup Entering Setup Press DEL to enter SetupControl Keys Getting HelpMain Menu Sub-MenuBoot Menu Bar MainAdvanced SecuritySystem Time Main AMI BIOS, Processor, System MemorySystem Date Advanced CPU Configuration Execute Disable Bit IDE Configuration Sata ConfigurationConfigure Sata as IntelR HT TechnologyPrimary/Secondary/Fourth IDE Master/Slave USB Configuration Hotplug USB FDD Support USB Mass Storage Device ConfigurationAcpi Configuration Advanced Acpi Configuration USB Mass Storage Reset DelayEmulation Type Acpi Version Features Chipset Acpi Configuration High Performance Event TimerAcpi Apic Support Hpet Memory AddressAhci Configuration Ahci Bios Support Ahci Port 1, Ahci PortMark All Events as Read Event Log Configuration View Event LogClear Event Log Ipmi 2.0 Configuration Status of BMC, BMC Firmware Version BMC LAN ConfigurationView BMC System Event Log Clear BMC System Event LogNotify BMC IP Source Hardware Health InformationIntel VT-d Configuration Remote Access Configuration Serial Port Number, Base Address, IRQ, Serial Port ModeRedirection After Bios Post Sredir Memory Display DelayExecute TPM Command TPM Enable/Disable StatusTrusted Computing TCG/TPM Support TPM Owner StatusResume By Ring APM Configuration Resume On RTC AlarmResume By PCI-E Device Boot Boot Settings Configuration Quick Boot Bootup Num-Lock Wait For F1 If ErrorBoot Device Priority Flash Write ProtectionUser Password / Change User Password Security Supervisor Password / Change Supervisor PasswordChassis Intrusion Chipset CPU Bridge Configuration QPI Links Speed Memory Mode South Bridge Configuration Onboard LAN1, LAN2 BootRestore on AC Power Loss QPI FrequencyLoad Optimal Defaults Load Failsafe DefaultsExit Save Changes and Exit Discard Changes and Exit

MS-9297 specifications

The MSI MS-9297 is a versatile motherboard designed to cater to the needs of both gamers and professionals looking for high performance and reliability. Based on the ATX form factor, this motherboard offers a robust platform for building powerful desktop systems. One of its key features is compatibility with the latest Intel processors, supporting socket LGA 1155 and spanning multiple generations of Intel's Core i3, i5, and i7 series.

The MSI MS-9297 is equipped with the Intel H67 chipset, which allows for advanced features such as integrated graphics support. This chipset enables users to leverage Intel’s HD Graphics technology, providing excellent multimedia performance without a dedicated graphics card. This is particularly useful for users who engage in casual gaming or need efficient video playback.

In terms of memory support, the MSI MS-9297 boasts four DDR3 DIMM slots, allowing for up to 32GB of RAM at speeds of up to 1600MHz. This extensive memory capacity and speed enable efficient multitasking and ensure smooth operation in memory-intensive applications. Additionally, the motherboard supports dual-channel memory architecture, maximizing data transfer rates.

Connectivity is another strong point of the MSI MS-9297. It features multiple USB ports, including USB 3.0 support, allowing for faster data transfer rates with compatible devices. The motherboard also provides SATA III ports, facilitating quick and efficient storage options. With audio channels powered by the Realtek ALC892 codec, users can expect high-definition audio output, making it suitable for media consumption and gaming.

Moreover, the MS-9297 incorporates MSI’s exclusive technologies, such as the Click BIOS II, which simplifies the BIOS interface and presents essential information in a user-friendly manner. This feature accommodates novice builders and seasoned professionals alike, streamlining the system setup process.

The motherboard also includes various expansion slots, such as PCI Express x16 slots, allowing for future upgrades with dedicated graphics cards or other PCI Express devices. Its well-designed circuitry and robust components ensure stable performance and longevity, catering to the needs of users who demand reliability.

In summary, the MSI MS-9297 stands out for its combination of performance, expandability, and user-friendly features, making it an ideal choice for those looking to build a solid and capable computer system for gaming, creative work, or everyday tasks.