MSI RG60G manual Static IP Address, Dynamic IP Address

Page 20

MSI RG60G

1.LAN IP Address: the local IP address of this device. The computers on your network must use the LAN IP address of your product as their Default Gateway. You can change it if necessary.

2.WAN Type: WAN connection type of your ISP. You can click Change button to choose a correct one from the following four options:

A.Static IP Address: ISP assigns you a static IP address.

B.Dynamic IP Address: Obtain an IP address from ISP automatically.

C.Dynamic IP Address with Road Runner Session Management.(e.g. Telstra BigPond)

D.PPP over Ethernet: Some ISPs require the use of PPPoE to connect to their services.

E.PPTP: Some ISPs require the use of PPTP to connect to their services.

F.L2TP: Some ISPs require the use of L2TP to connect to their services

4.3.1.1 Static IP Address

WAN IP Address, Subnet Mask, Gateway, Primary and Secondary DNS: enter the proper setting provided by your ISP.

4.3.1.2 Dynamic IP Address

1.Host Name: optional. Required by some ISPs, for example, @Home.

2.Renew IP Forever: this feature enables this product to renew your IP address automatically when the lease time is expiring-- even when the system is idle.

4.3.1.3Dynamic IP Address with Road Runner Session Management.(e.g. Telstra BigPond)

1.LAN IP Address is the IP address of this product. It must be the default gateway of your computer.

2.WAN Type is Dynamic IP Address. If the WAN type is not correct, change it!

3.Host Name: optional. Required by some ISPs, e.g. @Home.

4.Renew IP Forever: this feature enables this product to renew IP address automatically when the lease time is being expired even the system is in idle state.

14Turbo 802.11b/g 4 Port Wireless Broadband Router

Image 20
Contents MSI RG60G Ieee 802.11b/g and Bluetooth 2.4 GHz operation Ieee 802.11b/g und Bluetooth 2.4 GHz BetriebItaly LuxembourgMSI Technology GmbH Operating rangeHinweise zur Reichweite Revision History Date First Release July Important Safety Precautions Table of Content Functions and Features High speed for wireless LAN connection Statistics of WAN SupportedRoaming Ieee 802.11b compatible 11MSPI Mode Supported Support WPA-PSK and WPADoS Attack Detection Supported System time SupportedPacking List Hardware Installation Panel LayoutAntenna LAN Ports 1~4 Power WAN Port Rear PanelProcedure for Hardware Installation Decide where to place your Wireless Broadband RouterSetup LAN connection Setup WAN connectionMake Correct Network Settings of Your Computer PingMSI RG60G Configuring Wireless Broadband Router Start-up and Log WizardSetup IP Setting WAN Type, IP Mode Press ChangeStatic IP Address Dynamic IP AddressPPP over Ethernet Pptp1.6 L2TP MSI RG60G Wireless Setting and 802.1X setting * Wireless settings * 802.1X Setting Radius Shared KeyWPA-PSK WPA2-PSK AES WPA2 AES WPA1/WPA2 3 WDS Dynamic DNS Dhcp Server Click More Advanced DoS Attack Detection Basic Setting Discard Ping from WAN sideSPI Mode MAC Address Control IP Address Packet Filtering * Inbound Filter ExampleField MSI RG60G * Domain Filter Enable Domain Filtering * Domain Filter* Log DNS Query * Privilege IP Addresses Range* Enable * URL Blocking Enable URL FilteringMSI RG60G Routing Table Destination Subnet Mask Gateway Hop Enabled Schedule Rule Click Add New RuleDelete After configure Rule 1à Schedule EnableEdit MSI RG60G Virtual Server 9 DMZ * IP Address of DMZ Host * Non-standard FTP portSpecial AP Recommended AdministrationChange Password Firmware Upgrade Backup SettingSystem Time Reset to factory defaultReboot Remote Access * Remote Administrator Host/Port * Get Date and Time by NTP Protocol* Time Server * Time Zone* Administrator Time-out Network wake-up * MAC Address for Wake-on-LANDiagnostic StatusSystem Status System Log* E-mail Alert Enable Log Notification* IP Address for Syslog * Smtp Server IP and PortSnmp Setting * Enable Snmp* Get Community * Set CommunityConfiguring Turbo Mode With Client Select Optimize for performance mode Configuration Confirmation Appendix a TCP/IP Configuration for Windows 95/98 Install TCP/IP Protocol into Your PCSet TCP/IP Protocol for Working with NAT Router MSI RG60G MSI RG60G Configure IP manually MSI RG60G Authentication Server Equipment DetailsPC1 PC2DUT and Windows 2000 Radius Server Setup ConfigurationSetup Windows 2000 Radius Server Setup DUTSetup Network adapter on PC Enable Ieee 802.1X access controlWindows 2000 Radius server Authentication testing Smart card or other Certificate PropertiesCertificate information on PC1 DUT authenticate PC2 using PEAP-TLS Appendix C WPA-PSK and WPA WPA-PSK Method1MSI RG60G Back to Connection Method2MSI RG60G WPA MethodMSI RG60G Then Choose certificate like above MSI RG60G Result Choose View available Wireless Networks like below MSI RG60G Appendix D FAQ Troubleshooting Reset to factory DefaultHardware and Port Characteristic Operational & Functional CharacteristicWireless Support Environment, Certification and Reliability