MSI RG60G manual * 802.1X Setting, Radius Shared Key

Page 25

MSI RG60G

802.1X Setting

802.1X

Check Box was used to switch the function of the 802.1X. When the 802.1X function is enabled, the Wireless user must authenticate to this router first to use the Network service.

1.RADIUS Server

IP address or the 802.1X server’s domain-name.

2.RADIUS Shared Key

Key value shared by the RADIUS server and this router. This key value is consistent with the key value in the RADIUS server.

Turbo 802.11b/g 4 Port Wireless Broadband Router

19

 

Image 25
Contents MSI RG60G Ieee 802.11b/g und Bluetooth 2.4 GHz Betrieb Ieee 802.11b/g and Bluetooth 2.4 GHz operationItaly LuxembourgHinweise zur Reichweite Operating rangeMSI Technology GmbH Revision History Date First Release July Important Safety Precautions Table of Content Functions and Features Statistics of WAN Supported High speed for wireless LAN connectionRoaming Ieee 802.11b compatible 11MSupport WPA-PSK and WPA SPI Mode SupportedDoS Attack Detection Supported System time SupportedPacking List Panel Layout Hardware InstallationRear Panel Antenna LAN Ports 1~4 Power WAN PortDecide where to place your Wireless Broadband Router Procedure for Hardware InstallationSetup LAN connection Setup WAN connectionPing Make Correct Network Settings of Your ComputerMSI RG60G Configuring Wireless Broadband Router Wizard Start-up and LogSetup Press Change IP Setting WAN Type, IP ModeDynamic IP Address Static IP AddressPptp PPP over Ethernet1.6 L2TP MSI RG60G Wireless Setting and 802.1X setting * Wireless settings Radius Shared Key * 802.1X SettingWPA-PSK WPA2-PSK AES WPA2 AES WPA1/WPA2 3 WDS Dynamic DNS Dhcp Server Click More Advanced SPI Mode Basic Setting Discard Ping from WAN sideDoS Attack Detection MAC Address Control IP Address Packet Filtering Example * Inbound FilterField MSI RG60G Domain Filtering * Domain Filter * Domain Filter Enable* Log DNS Query * Privilege IP Addresses Range* Enable URL Filtering * URL Blocking EnableMSI RG60G Routing Table Destination Subnet Mask Gateway Hop Enabled Click Add New Rule Schedule RuleEdit After configure Rule 1à Schedule EnableDelete MSI RG60G Virtual Server * Non-standard FTP port 9 DMZ * IP Address of DMZ HostSpecial AP Change Password AdministrationRecommended Backup Setting Firmware UpgradeReboot Reset to factory defaultSystem Time * Get Date and Time by NTP Protocol Remote Access * Remote Administrator Host/Port* Time Server * Time ZoneNetwork wake-up * MAC Address for Wake-on-LAN * Administrator Time-outStatus DiagnosticSystem Log System StatusLog Notification * E-mail Alert Enable* IP Address for Syslog * Smtp Server IP and Port* Enable Snmp Snmp Setting* Get Community * Set CommunityConfiguring Turbo Mode With Client Select Optimize for performance mode Configuration Confirmation Install TCP/IP Protocol into Your PC Appendix a TCP/IP Configuration for Windows 95/98Set TCP/IP Protocol for Working with NAT Router MSI RG60G MSI RG60G Configure IP manually MSI RG60G Equipment Details Authentication ServerPC1 PC2Configuration DUT and Windows 2000 Radius Server SetupSetup Windows 2000 Radius Server Setup DUTEnable Ieee 802.1X access control Setup Network adapter on PCSmart card or other Certificate Properties Windows 2000 Radius server Authentication testingCertificate information on PC1 DUT authenticate PC2 using PEAP-TLS Appendix C WPA-PSK and WPA Method1 WPA-PSKMSI RG60G Method2 Back to ConnectionMSI RG60G Method WPAMSI RG60G Then Choose certificate like above MSI RG60G Result Choose View available Wireless Networks like below MSI RG60G Reset to factory Default Appendix D FAQ TroubleshootingOperational & Functional Characteristic Hardware and Port CharacteristicEnvironment, Certification and Reliability Wireless Support