Power Management
Restore on AC Power Loss
This setting specifies whether your system will reboot after a power failure or interrupt occurs. Available settings are:
[Power Off] | Leaves the computer in the power off state. |
[Power On] | Leaves the computer in the power on state. |
[Last State] | Restores the system to the previous status before power |
| failure or interrupt occurred. |
Resume On PME#
When set to [Enabled], this setting allows your system to be awakened from the power saving modes through any PME (Power Management Event).
Resume On RTC Alarm
When [Enabled], your can set the date and time at which the RTC