Using the Oven

Caution

The electronic clock features Touch-Control technology. To operate, simply touch the glass control symbols with your fingertip.

The touch control sensitivity continuously adapts to ambient conditions. Make sure the glass surface of the control panel is clean and free of obstacles when plugging in the oven.

If the clock does not respond correctly when you touch the glass, unplug the oven for a few seconds and then plug it in again. Doing this causes the sensors to adjust automatically so that they will react once more to fingertip con- trol.

Electronic Clock Settings

Symbol : lights up during the TEKA Hydroclean® function.

Symbol : lights up when the clock timer is selected.

Symbol : lights up to indicate that the oven is programmed.

Symbol : indicates that the oven is trans- mitting heat to the food.

+/ – Sensors : enable you to select a time.

Sensors , and : enable you to programme the electronic clock functions.

Setting the Time

•When you turn on the oven, you will see the clock flashing 12:00.

•Set the clock by touching the + or – sensor. You will hear 2 beeps confirming that the time has been set.

•To change the time, press the + and – sen- sors at the same time. The current time will then flash on the screen. Change the time by pressing the + or – sensors. Two beeps will then confirm that the new time has been set.

NOTE

The clock light has a night mode so the dis- play light will dim between 00:00 and 6:00 hours.

Manual Operation

•After setting the clock, the oven is ready for use. Select a cooking function and temp- erature.

•During cooking, symbol will light up to indicate that heat is being transmitted to

the food.

•This symbol turns itself off when the selec- ted temperature has been reached.

•Set the controls to to turn off the oven.

CAUTION

After cooking, you will notice that the oven cooling system is still on. This is normal and is used to cool the oven down quickly.

ENGLISH