Lennox International Inc BV4000C operation manual Surround Assembly

Page 10

INSTALLATION

SURROUND ASSEMBLY

NOTE: Do not face seal over chimney cooling air system on superior brand or any brand fireplace which is designed with the chimney cooling air sys- tem.

13.Pull the insert slightly forward to its desired position; attach the face shield using the surround clips and hardware as shown. The fiberglass insulation strips should be secured along the top and sides (step 3). Assemble the gold-tone trim using the 2 inside cor- ner brackets. Attach trim to the face shield and stove.

Push the unit back until face shield insulation is com- pressed against the fireplace front, forming a tight seal.

Test for air leaks by holding a candle around edge of face shield to see if smoke is pulled into fire- place.

*Note: Preferred method of attaching connector to flue outlet is to install two L-Brackets (1” angle bracket, 3/4” wide) on opposite sides of the flue outlet: Use self- tapping screws to secure in place. Cut a ½” (height) and ¾” (width) notch in the front of connector (pipe, liner or adapter that will attach to flue outlet). Install connector into flue outlet and secure to angle brackets using ma- chine screws. Seal around connection with furnace ce- ment.

PAGE 10

Image 10
Contents Installation and Operation Manual Important Warnings Table of Contents Questions to ASK Local Building Official Planning Your InstallationSmoke Detectors Floor Protection Alternative Floor Protection MaterialsDraft Requirements Chimney InspectionClearances Ventilation Masonry Fireplaces Factory Built Fireplaces Fireplace Chimney Maximum Size to Ensure Proper Draft Fireplace Installation BV4000C Minimum Fireplace Dimensions InstallationCatalytic Temperature Probe Installation Steps Surround Assembly Positive Flue Connection for Masonry FIRE- Place Procuct Features and Controls Care and Operation BREAK-IN Period HOW to Start and Maintain a FireRefueling Blower System Bypass Damper Control Maintenance DOOR/GLASS Gasket and ASH Dump Gasket Catalyst ReplacementCleaning Blowers Servicing GlassCatalytic Combustor Troubleshooting Catalyst Substrate Cracking Catalyst PluggingCatalyst Deactivation Catalyst SubstrateSpecifications Model BV4000C BTUReplacement Parts List Model BV4000C Component Diagrams Model BV4000C Cord Changeover KIT Offset AdapterGold Door KIT Safety Listing Label / EPA Label Service and Maintenance LOG West Taft Avenue Orange, CA